Feed aggregator

@Nisto7777 wrote:

I occasionally convert sequenced video game music formats, to do arrangements/remixes and whatnot. But I can’t seem to replicate the exact tempo of some songs (doing a direct side-by-side comparison completely within Renoise reveals a de-sync eventually).

When you import MIDI files into Renoise, it writes the BPM into the actual song pattern (a rounded tempo). Is this the value that’s actually used internally, or is Renoise in fact using the exact MPQN (microseconds per quarter-note) tempo specified in the MIDI files “behind the scenes”?

The tempo may be quite exact in some cases, so just lowering or raising the BPM by 1 doesn’t help.

Posts: 3

Participants: 3

Read full topic

@Ledger wrote:

New alpha Channel Strip Buddy:

ledger.scripts.ChannelstripBuddy_V0.5.xrnx (1.9 KB)

A tool to help when you want to use the same plug repeatedly over several tracks, as with a channel strip. However it works with any DSP you like.

1. Load any device in renoise: EQ,Channelstrip,compressor etc.
2. Right-Click on it for menu entry CSB - Set As Target
3. Now use shortcut `CSB` Toggle Target Device

The shortcut has multiple functions:

• You can open and close the target device (if it has a gui) on the current track .
• Go to a new track with an instance already present of the ‘Target Device’ and it will select/open it, while closing all other previously open gui instances from other tracks.
• If there is no ‘Target Device’ on the new track, one will be added and opened in the same way.

Workflow: Choose your target device. Use shortcut while navigating around to use same device in any track. Locating, loading and open/close operations are all in one shortcut.

//////////////////////////////////////////////////////////////////////
There is also a shortcut for the menu entry mentioned in step 2. above:
`CSB` Set Selected As Target Device

Posts: 1

Participants: 1

Read full topic

@zooterman wrote:

Hi, currently the line which you select on the waveform as the start point for playback is lost in the waveform background. Where can I find this item to change its color and make it visible?

(Redux)

-Thx

Posts: 1

Participants: 1

Read full topic

@2_daze_j wrote:

What happened to status updates!! It was fun Yo!! and I just became a, “normal member,” when I was almost a, “Levitating Member,” omfg that is horrible!! Horrible!!!

10 years I been using renoise… Now I am normal! NO!!!

Posts: 2

Participants: 2

Read full topic

@kdgh wrote:

If possible, I would love to send audio signal to itself. So put a send on send and let that send sent to itself to create a feedback loop. I know this can blast some ears for those who are not aware of the effect, but Dub (Techno) is highly keen on this technique. Something I would love to be able to recreate.

So basically; allow to disable the error “Sending a send to itself is not allowed”. Maybe make an “Are you sure you want to send a send to itself? y/n”. Thanks a zillion!

Posts: 7

Participants: 3

Read full topic

@PPLo wrote:

Posts: 1

Participants: 1

Read full topic

@Rene wrote:

Hello Renoisers,

new track out: Evening Sun. Music is a bit grown-up, very conventional, easy listening and even maybe suitable for your elevator’s ambience ;-).

Tell me, what you think & happy listening,
René

Posts: 4

Participants: 4

Read full topic

@queezteen wrote:

Hi!

I’m using the exponential delay tool. What I’m finding is since it writes all the notes into different note lines that each time the voice plays it’s overlapping.

I can’t seem to find out how to turn the instrument in the sampler section to a single voiced instrument. Is this possible? Or is there a work around for this particular instance?

Thanks!

Posts: 2

Participants: 2

Read full topic

@Drito wrote:

Hey guys!

So, the last tracker I used was Protracker 3.11 on the Amiga wondermachine (ok, a bit of Madtracker back in 2004., but it sucked), I recently purchased Renoise and in couple of hours did my first song, but honestly, I’m superlost. It’s been 20 years since my last serious tracking and I’m missing some of the things I knew how to do in Protracker.

For instance, the mute instruction. Not the complete mute, but how you’d mute a guitar string. Can’t find that option anywhere in the documentation.

The thing that bothers me atm is that I can’t find the “spread notes” option. I started the song in a very low tempo, and now I’m stuck with 16th’s and i need to double that amount so I thought I’d just double the tempo and spread the notes across the pattern. Is there a possibility for that or maybe Renoise has a more elegant option?

A HUGE bug I just came across. Tried to export the files to separate channels so I can mix the track a bit in Cubase and maybe add a live bass since it lacks in that department and half the channels bounced WRONG. For instance, I have a channel with bells on delay, monotone. What bounced was a 2 tone polyphony that abruptly cuts…and that’s it. Not just that I didn’t get the effect out, but it was 2 tones all of a sudden…What’s going on? Literally none of the sounds with ANY instructions in the pattern or effects exported right. This is insane, to be honest.

In any case, thanks for the answers.

p.s. This is the tune I did to test out Renoise

Posts: 10

Participants: 5

Read full topic

@ffx wrote:

Hi,

I tried to indent a big doofer code block, and failed. Is there a way to 4-spaces-indent a selection of text? Also is there a tag like “spoiler” in the old forum, for big code blocks?

Posts: 2

Participants: 2

Read full topic

@ffx wrote:

If you go to a doofer’s preset menu and select “Save as” and then press the button “cancel”, it still tries to save the preset.

Maybe I already reported this

Posts: 2

Participants: 2

Read full topic

@ffx wrote:

Lot of Renoise file extensions like doofer, chain etc. are not allowed in the forum, also zip is not allowed

Posts: 2

Participants: 2

Read full topic

@Land_of_Bits wrote:

hey here its my new song

Posts: 5

Participants: 2

Read full topic

@midierror wrote:

I’d like to make my hi hats more appealing by SLIGHTLY adjusting their start time. At the moment I’m using the S command and writing 0-9 in the unit column and 0-1 in the tens column by hand.

So

S00 to S19

Is there a tool which allows you to set a random start time within a selected range?

Posts: 9

Participants: 5

Read full topic

@Komu wrote:

New track!
Little different approach than usual.
I decided to do my own “rhythm roulette”.
I went to crate digging and bought 4 records, and then sampled only sounds from those albums.
At first I only used 3 records, but then I decided to break the rules and sampled 2 other records!
So every sound you hear is from vinyl, 5 different records total.

https://choon.co/tracks/0ta39w8dci6/five-to-four/

All the samples that I found on those records:
http://www.mediafire.com/file/r154howtfqw9gyf/Five_to_Four.zip/file

Should I start “Komu’s Rhythm Roulette” monthly competition?

Posts: 9

Participants: 4

Read full topic

@boonier wrote:

I want to display the currently selected track name in my controller gui. I’ve scoured through the applications and can seem to find any mapping for this.

Do I have to roll my own?

Not shy to do so, just some helpful pointers where

cheers

Posts: 1

Participants: 1

Read full topic

@sidwave wrote:

Hey

Fasttracker tunes sound wrong and dark (filtered) in Renoise.
I realize the complications of implementing real FT2 player (BASS.dll), in Renoise.
But my solution is to switth to FT2 mode, and Renoise can be somehow layered on top of this ?

This means, when working on loaded XM module, that you RENDER the XM samples to a buffer, and Renoise then operates on these renderings. I think my solution is good!

What you on this ??

Posts: 1

Participants: 1

Read full topic

@Ledger wrote:

Though we seem to have lost personal post signatures we can add links to our profiles for when click profile pictures.

Here I have added a link to a forum post containing my scripts:

Click Here For List Of My Renoise Tools

/////////////////////////////////////////////////////////////////////////////////////////////////////

To do similar:

1. you need to go to your preferences via the cog in your profile menu (top right):

2. Update your About Me textbox under Preferences > Profile

   For links use the bracket format: [LINK TEXT HERE](URL HERE)

Posts: 1

Participants: 1

Read full topic

@Dry_Eyes wrote:

I have created a 14 minute track called Frozen Sun which fuses icy reverb-drenched melodies with tribal percussion for an all new sound…I call it Drum ‘n’ Drone. Created 100% on Renoise on Linux. No VSTs or extra plugins.

Posts: 3

Participants: 2

Read full topic

@Meef_Chaloin wrote:

I’ve been using a launchpad mk2 script from somewhere on this forum and it works well on the whole. But I recently did a live show using ableton and the Nativekontrol Arsenal script, and that treats the launchpad like layers of control and you can change what the layers are. It gives you a lot of control over many aspects and makes it simple and quick to change areas/layers.

This got me thinking about Duplex, I have set it up but mostly can’t be bothered to move it and set it up. So, in order to try to use my controller more I am thinking about using the states function to create a sort of shift button to toggle another set of mappings.

My plan is to use the mixer button as a momentary state button so when you press it the top left pad will be a record/edit pad ideally in red when enabled, there will be next and previous script pads maybe top right, and maybe a row of track mutes. So the state creates a navigation patch and quick place start recording or mute some tracks.

From reading the documentation it seems this is all fairly easily possible (although a massive challenge for me) and I think I understand how to do some of it at least but are there any other controller scripts that use states that I can have a look at? Any other thoughts on this approach?

Posts: 2

Participants: 2

Read full topic