Feed aggregator
110% Display Zoom value
@Beatslaughter wrote:
Would it be difficult to add a 110% zoom value to the list? I’ve tried editing the config by hand, but the value doesn’t stick and it switches back to Auto. Would be nice to have everything just a tad bigger but not as huge as 125%.
Love the detachable mixer and new automation curves.
Posts: 1
Participants: 1
3.2 Unsoloing a soloed track turns on tracks set to off or mute
@Snares wrote:
Hey I’ve noticed right away here unsoloing a soloed track from the edit page or track scopes in 3.2 unmutes everything that was previously muted, Gets a bit dangerous if you have a bunch of sound design scratch tracks and midi tracks going.
Posts: 2
Participants: 2
"undo" acts weird in 3.2 , not in 3.1
@Roppenzo wrote:
Loaded project with same vstfx and vsti’s in both 3.1 and 3.2,
3.1 no issues with “undoing” things changed in step editor,
3.2 gives result “nothing to undo” and the second time pressing “undo” “change value was undone” ?
in 3.1, undo works, in 3.2 undo does nothing.
Posts: 1
Participants: 1
Redux 1.1 demo not working in Logic Pro
@grape_ape wrote:
The new demo for Redux does not work in Logic Pro. Logic scans it but says something along the lines of being unable to validate it (I forge the exact message). It doesn’t even show up in the list of AUs, but it does show up in the plug-in manager, but only to show that it doesn’t work.
Posts: 1
Participants: 1
How to avoid that already playing notes are stopped when scheduling patterns?
@sagosen wrote:
So I’m messing around with using Renoise as a live tool, combining programmed patterns with long samples. I have a track loaded as a sample, I trigger it to start in track 01, pattern 01, and have pattern 02 be a looping pattern so I can go back to that one with a click when I want to change a sample.
When I schedule, say pattern 03 to start, the long sample from pattern 01 is cut, no matter what setting I use for NNA on the sample.
I want that audio sample to keep playing even if I schedule a different pattern to start. Is this possible?
Posts: 3
Participants: 2
Ideas for spectrogram view
@ffx wrote:
Here are some ideas for the spectrograph view.
-
At fast speed, it currently flickers quite a lot (macos), which makes reading a bit unpleasant. But only fast speed gives good resolution, that’s why I would like suggest also a “super fast” mode - without flickering. Flickering could be compensated with a more clever scrolling algorithm.
-
There could be a little “threshold” slider on top of the spectrogram, so everything above threshold can get a radically different color, e.g. green for normal, reds for above. So you could nicely see which frequency areas are too crowded. The threshold should respect the selected slope factor.
-
There could be pattern start indicators on the left scrolling, maybe just horizontal lines
-
User definable color transition, e.g. for white background themes. In config file.
Please continue with your thoughts about it.
Posts: 1
Participants: 1
Elandor (Glitch Electronica)
You Are a Nightmare
@chemeleon wrote:
I finished this song about the time I voluntarily admitted myself to a psychiatric ward - little did I know they’d section me and keep me there for a while a few days later
Anyways, this song uses instances of Cthulhu, Reaktor 6 (Steampipe 2), and Serum, as well as samples from Methlab’s ‘Creative Core’ selection. Vocals present. Mixed in Renoise with the help of FabFilter’s Pro plugins. Hope you enjoy
Posts: 1
Participants: 1
3.2.0 Cannot Save New Song
@haelen wrote:
Hi,
I’m using a MBP with Mojave.
Renoise is taking 2’30" to load , and when I try to save a new song, freezes (cannot enter song title) and I have to power off and on to reboot.
TIA,
Tim
Posts: 1
Participants: 1
Here's a song that may be left unfinished for a while
@chemeleon wrote:
First off, congrats to Renoise team for releasing 3.2 looking forward to laterally applying all the nice new features
Second, I’ve been in an acute mental ward for a couple of weeks and put this together from bits of old song and me singing ‘clever man’ into my laptop mic. I’m just wondering what people think now, as it’s going to take a lot of work to finish (for soooo many reasons… vocals recorded with 3 different mics, really subtle variations in bass patch and kit and fx make a huge difference, difficult to find a cohesive balance, etc)… I’ve got a second part lined up but want to get the first part right first.
I’ve done a few iterations since this version, none of them sound as good, no idea why.
For now it’s called ‘Post Sleep Dreaming’
…but I might end up just calling it ‘Clever Man’.
If there’s enough interest I’ll post some private updated versions for people to listen to later on.
Posts: 1
Participants: 1
Sononym 1.1.0 (August 24th, 2019)
@rainydayshirts wrote:
Sononym got an up date, Renoise got an update, Redux got an update, ERBODY got an update! This has been a good week.
sononym.net SononymSononym is an innovative sample browser for Windows, MacOS and Linux.
Update Highlights:
Posts: 1
Participants: 1
Let's Go! - Skolskoly
@Skolskoly wrote:
Hi everyone!
Over the past few months I’ve been finishing up an album that I’ll be releasing in September.
In addition, I have some left-over tracks which I’ll be posting in this thread. Enjoy!
Some more info about the album is on my website.
Posts: 1
Participants: 1
Ctrl-z is ctrl W
@gentleclockdivider wrote:
Again renoise has magically turned ctr-z into ctrl-w ( all other programsare still ctrl-z ) and my keyboard hasn’t changed
Posts: 1
Participants: 1
My Renoise 3.2 Video Beats
Renoise 3.2 first bug report
@Medievil-Music wrote:
Hello, my dear friends.
have any of you encountered such a problem in Renoise 3.2 ?
Where do these windows came from ?
- Why the font has changed in hex\pattern editor ? It was like Renoise font, now it is Arial
*Running the program on Win 8.1 core i5 2500hz 12gb RAM
Thank you
Posts: 1
Participants: 1
Can't control easing of automation lines in 3.2
@zezic wrote:
OS: Ubuntu 18.04, Renoise 64Bit - V3.2.0 (Built: Aug 26 2019)
System specs: 16GB RAM, AMD FX-8350, M-Audio Fast Track Ultra (using JACK)
Config.xml (53.7 KB) Log.txt (13.6 KB)
Description:
When trying to change the easing of a curve in automation editor by clicking red dot the new line is created instead.
Steps to reproduce look like this:
- Launch Renoise
- Open automation editor pane
- Make sure it’s in “Lines” mode
- Draw a line
- Hover mouse over the red dot (mouse cursor doesn’t change its form, still looks like a cross)
- Drag the red dot (a new line starts to appear instead of changing existing line easing)
Expected results:
Visual feedback (changing cursor form the cross to the up-down arrow icon) and controlling the easing of an existing line (its curvature).
Actual results:
A new line starts to appear at the point of click.
Video demo: https://streamable.com/d6qsz
Posts: 3
Participants: 2
OSC Renoise to CV? ( Modular Eurorack )
@krahz wrote:
OSC has a higher resolution as Midi, which makes it interesting for CCs
SDS Digital (Amazing open Mind Modules) create a WIFIMIDI Eurorack module that work with OSC
http://www.freshnelly.com/WiFiMIDI/WiFiMIDI.htm
https://www.modulargrid.net/e/sds-digital-wifimidi
Does somebody have experience with OSC and Modular?
- is that possibly an elegant alternative to DC-Coupled Audio Interfaces?
- Renoise as (OSC) Master Clock or Slave without Jitter possible?
- Record CC as the Way possible as with Midi to CV?
Posts: 1
Participants: 1
Add more breakpoints between lines in the automation view
@LegendaryTaunt wrote:
It’s awesome that between lines, there are points that you can drag up and down to create easing in the automation editor. But why just one?
What do you lot think of right clicking the area between points, and selecting an “add additional breakpoint” to add a second, third, etc… Then we can create complex automation curves without having to use a lot of lines in the project.
The breakpoint could be right clicked on and there could be an option to delete the breakpoint as well.
Visually, if you were to have three breakpoints it would look something like this
Thoughts?
Posts: 2
Participants: 2
Messing With Stretching
@Achenar wrote:
Time-stretching tiny looping samples in Renoise 3.2 produces some strange, unexpected results.
Posts: 3
Participants: 3
Pages
