Forum

Hi all,

I am trying to load a VST3 into ReNoise from the standard VST3 file pathway but Renoise can not find it. I think this is probably a problem on ReNoise’s end because Ableton is able to “find” the VST. I have done a rescan, reinstall, and restart. Any further things I should try?

I am using Windows 10.

Thanks!

2 posts - 2 participants

Read full topic

Renoise 3.4.0 with WASAPI sound: Input: Stereo Mix Sum
Windows 11 latest updates
Realtek Onboard soundcard

Recording the Stereo Mix Sum sounds heavily modulated.

Renoise 3.4.0 with DirectSound sound: Input: Stereo Mix Sum
Windows 11 latest updates
Realtek Onboard soundcard

Recording the Stereo Mix Sum sounds perfect.

Everything, the sound card and Renoise sample rate are all set to 44100 Hz 16 bit.

1 post - 1 participant

Read full topic

top: without shading
bottom: with shading

@taktik do you think it is possible to add (graphical) shading into the Renoise interface? it will create a little more calculating for the CPU, so it should be enabled/disabled - able.

1 post - 1 participant

Read full topic

Dear developers,

I had a go with Renoise the demo version a couple of times, I must say it is very good and well designed player, a true homage to the trackers from the Amiga and the PC demoscene era from the good old days So I must say it is almost an instant buy for me, but what holds me back currently is that the tunes from these good times, don’t play exactly the same as with FastTracker or any old trackers. I probably would reckon there are other bugs or features that you probably would look into first rather in fixing this, but my question is; is this something that is done on purpose or will this be patched out eventually?

Best regards!

1 post - 1 participant

Read full topic

Hello all,
The chorus/flanger filter cutoff frequency value is not being displayed correctly in 3.4.1. The slider seems to be working as it’s supposed to affecting the correct frequency and not the one shown above it. So this is just a value display issue I think.
Windows 7x64 / Renoise 3.4.1

1 post - 1 participant

Read full topic

I’m getting intermittent but recurring hard crashes. They occur at the same spot in the song each time.

OS Name: Microsoft Windows 10 Home
OS Version: 10.0.19044 N/A Build 19044
Processor(s): 1 Processor(s) Installed.
[01]: Intel64 Family 6 Model 158 Stepping 9 GenuineIntel ~4200 Mhz
Total Physical Memory: 32,705 MB
Available Physical Memory: 24,944 MB
Virtual Memory: Max Size: 65,473 MB
Virtual Memory: Available: 55,282 MB
Virtual Memory: In Use: 10,191 MB

First it was doing this:

CrashLog: Handling Exception! Code : C0000005
CrashLog: Handling Exception! Code : C0000005
CrashLog: 000000014060EADD: l9_ippsLn_32f_A21 +240FED
CrashLog: 000000014060EADD: l9_ippsLn_32f_A21 +240FED
CrashLog: 0000000140CB1322: l9_ippsLn_32f_A21 +8E3832
CrashLog: 0000000140CB15DD: +8E3AED
CrashLog: 0000000140ABE276: l9_ippsLn_32f_A21 +6F0786
CrashLog: 0000000140D7F70B: l9_ippsLn_32f_A21 +9B1C1B
CrashLog: 0000000140B0E3BE: l9_ippsLn_32f_A21 +7408CE
CrashLog: 00000001407A8C66: l9_ippsLn_32f_A21 +3DB176
CrashLog: 0000000140AD71A9: l9_ippsLn_32f_A21 +7096B9
CrashLog: 00000001407A8C91: l9_ippsLn_32f_A21 +3DB1A1
CrashLog: 0000000140B1A7AA: l9_ippsLn_32f_A21 +74CCBA
CrashLog: 00000001407A8C91: l9_ippsLn_32f_A21 +3DB1A1
CrashLog: 0000000140B1A932: l9_ippsLn_32f_A21 +74CE42
CrashLog: 00000001407A8CCC: l9_ippsLn_32f_A21 +3DB1DC
CrashLog: 0000000140AD8C6E: l9_ippsLn_32f_A21 +70B17E
CrashLog: 00000001407A8C91: l9_ippsLn_32f_A21 +3DB1A1
CrashLog: 00000001406BFFA2: l9_ippsLn_32f_A21 +2F24B2
CrashLog: 00000001407A8C91: l9_ippsLn_32f_A21 +3DB1A1
CrashLog: 00007FFAAF727034: BaseThreadInitThunk +00014
CrashLog: 00000001407A8C91: l9_ippsLn_32f_A21 +3DB1A1
CrashLog: FFFFFFFFFFFFFFFF: ??? +00000
CrashLog: 00000001407A8C91: l9_ippsLn_32f_A21 +3DB1A1
CrashLog: 00000001407A8C91: l9_ippsLn_32f_A21 +3DB1A1
CrashLog: 00000001407A8C91: l9_ippsLn_32f_A21 +3DB1A1
CrashLog: 00000001407A8C91: l9_ippsLn_32f_A21 +3DB1A1
CrashLog: 00000001407A8C91: l9_ippsLn_32f_A21 +3DB1A1
CrashLog: 00000001407A8C91: l9_ippsLn_32f_A21 +3DB1A1
CrashLog: 00000001407A8C91: l9_ippsLn_32f_A21 +3DB1A1
CrashLog: 00000001407A8C91: l9_ippsLn_32f_A21 +3DB1A1
CrashLog: 00000001407A8C91: l9_ippsLn_32f_A21 +3DB1A1
CrashLog: 00000001407A8C91: l9_ippsLn_32f_A21 +3DB1A1
CrashLog: 00000001407A8C91: l9_ippsLn_32f_A21 +3DB1A1
CrashLog: 00000001407CBC71: l9_ippsLn_32f_A21 +3FE181
CrashLog: 00000001407ABCA4: l9_ippsLn_32f_A21 +3DE1B4
CrashLog: 000000014070A769: l9_ippsLn_32f_A21 +33CC79
CrashLog: 000000014071EAA9: l9_ippsLn_32f_A21 +350FB9
CrashLog: 0000000140761F68: l9_ippsLn_32f_A21 +394478
CrashLog: 0000000140719646: l9_ippsLn_32f_A21 +34BB56
CrashLog: 000000014071E8B6: l9_ippsLn_32f_A21 +350DC6
CrashLog: 00000001403FD733: l9_ippsLn_32f_A21 +2FC43
CrashLog: 00000001403F8840: l9_ippsLn_32f_A21 +2AD50
CrashLog: 00000001403FE006: l9_ippsLn_32f_A21 +30516
CrashLog: 0000000140DE6363: l9_ippsLn_32f_A21 +A18873
CrashLog: 00007FFAAF727034: BaseThreadInitThunk +00014

Application: Caught an unhandled fatal exception (Thread: GUI)!
Application: Saving a backup…

Error Message: A fatal error or crash occurred (unhandled exception in thread: GUI).
Error Message: A backup of the current document was saved at
Error Message: ‘C:\Users<USERNAME>\AppData\Roaming\Renoise\V3.4.1\CrashBackups\spirit2_4_1_2022__13_20_crash.xrns’…
Error Message: This either happened because of a bug in Renoise, or because of a bug in one of its loaded components (plugins). Please contact bug@renoise.com and report this problem, so that it can be fixed.
Error Message: Note: It’s very important that we know exactly what has happened (what you were doing before this message popped up), or the problem cannot be replicated/analyzed. Please include a description of what you were doing and which components were being used…

I was using Valhalla Supermassive and Spitfire Audio Labs plugins- and wondered if they were causing the problem so I disabled them. Then I started getting a different hard crash!

CrashLog: Handling Exception! Code : C0000005
CrashLog: 000000014060EADD: l9_ippsLn_32f_A21 +240FED
CrashLog: 0000000140CB1322: l9_ippsLn_32f_A21 +8E3832
CrashLog: 0000000140ABE276: l9_ippsLn_32f_A21 +6F0786
CrashLog: 0000000140B0E3BE: l9_ippsLn_32f_A21 +7408CE
CrashLog: 0000000140AD71A9: l9_ippsLn_32f_A21 +7096B9
CrashLog: 0000000140B1A7AA: l9_ippsLn_32f_A21 +74CCBA
CrashLog: 0000000140B1A932: l9_ippsLn_32f_A21 +74CE42
CrashLog: 0000000140AD8C6E: l9_ippsLn_32f_A21 +70B17E
CrashLog: 00000001406BFFA2: l9_ippsLn_32f_A21 +2F24B2
CrashLog: 00007FFAAF727034: BaseThreadInitThunk +00014
CrashLog: FFFFFFFFFFFFFFFF: ??? +00000

Application: Caught an unhandled fatal exception (Thread: AUDIO SLAVES)!

This happens if I use Directsound and a USB DAC, and also if I use ASIO and my RME Fireface UCX.

Essentially, I’ve had this happen a few times now- it’s as if after a certain point in the song, it’s corrupt, and any attempt to play beyond there causes a crash. If I carefully recover/load without playing, and delete those patterns in the song editor panel on the left, all is well. Then later on, I’ll get to a point that corrupts again, and will have to rinse and repeat. The only difference is that if I am using plugins, GUI seems to throw an exception before audio slaves.

I did once see something go visually askew- the automation lines (for the cutoff of renoise’s own filter effect) jumped apparently out of bounds, giving a solid-looking editing region. No chance of a screenshot, as it bombed out quickly and I can’t repro on demand. However, it looks like something is broken in the automation editing, if I had to guess, and it makes other parts of renoise break due to corrupt values? This is could be very wide of the mark, of course- but it’s annoyingly intermittent, so hard to be more specific.

If I find any repro or other faintly useful details, I will try try to update this. It’s irritatingly vague

1 post - 1 participant

Read full topic

Here’s a new one that I just recently finished. All of the production and most of the music was composed with my MPC One… two of the synths I did using Renoise, then rendering each to its own wav to import into the MPC for mixing into the production.

https://freemusicarchive.org/music/Origami_Repetika/2022-tracks/memory-activated-wince

1 post - 1 participant

Read full topic

Have a great day!

https://www.youtube.com/embed/d95H9Z10mpQ

1 post - 1 participant

Read full topic

https://www.kickstarter.com/projects/sonicware/smpltrek-portable-production-sampler

Just stumbled on this, seems like something of interest to Renoisers

Stand-alone hardware thing that lets you sample using a built-in mic as well as record via a jack, then make tracks out of the sounds.

1 post - 1 participant

Read full topic

Hello,

I found tons of templates for many DAWs in the net, e.g. Ableton, FL Studio etc…
But I did not found some templates for Renoise…

Are the so rare?

Kind regards
Joachim

1 post - 1 participant

Read full topic

Hi all,

I bought Renoise after trying the demo. I liked it for drum programming and found it more intuitive than anything I have touched for that purpose. However, I prefer the instruments in Ableton for creating bass lines, synths, pads, etc. I saw it offered Ableton Link support and instantly bought it.

I can not get Ableton Link to work with Renoise. Tutorials for Ableton Link are vague and simply state that it should show up after selecting “show link toggle” in preferences. I have not been able to find tutorials for Renoise in the other direction that don’t require ReWire (RIP). Even the manual still says to use ReWire. For me, Ableton does not recognize that ReNoise exists or is running.

My goal is to use ReNoise kinda like a drum machine/vst/whatever in Ableton or vis versa. However, I understand this might now be completely possible.

What are the steps to use Ableton Link with ReNoise? Is there another method I should try?

I use windows.

Thanks!

1 post - 1 participant

Read full topic

Midi Mapping Request
MidiMapRQ.xrnx (1.0 KB)
version 1.2

MidiMapRQ.xrnx (971 Bytes)
version 1.1

contents:
v1.1:
a Load button
a Save button
v1.2:
Menu entry under Song:

• Load Default MIDI Maps
• Save Default MIDI Maps

This tool saves and loads the MIDI mapping as
MIDIMAPRQ.XRNM
next to the (once installed) tool location.

@Circe whatsup, are you really paying me something? You offered to hire me…

This tool got tested with Renoise 3.4.0 - It may work with Renoise 3.1 or newer.

There was a request for adding a tool with 1 button that would (only) map the LPB to a controller knob. This tool advanced to saving the whole current MIDI mapping (all knobs) to a default filename of MIDIMAPRQ.XRNM completely compatible with Renoise’s mapping file format.

2 posts - 1 participant

Read full topic

I don’t know if anybody already knew that it’s possible to load sfz as multisamples. I don’t exactly know since when this feature exists but I just tried to load a Piano sfz and the samples/keymap was imported flawlessly.

Just a hint.

2 posts - 2 participants

Read full topic

Let us gather some essential information. Since now all essential driver systems are supported for the most common operation systems on a PC, we shall collect the amount of CPU usage.

On a Windows 10 PC with 48 Mo on an I7 3,6 gHz and a 10 track mod (1 is a send) at 48 kHz you got:

An average CPU load about 34 % using ASIO on an external device (native).

An average CPU load about 26 % using WASAPI on an external device.

An average CPU load about 24 % using direct sound on an external device.

An average CPU load about 31 % using ASIO on an internal device (realtek & ASIO4all).

An average CPU load about 26 % using WASAPI on an internal device.

An average CPU load about 25 % using direct sound on an internal device.

I could imagine, I created 36 tracks with an amount of 25 % at 44.1 kHz using AFA and a crappy Lenovo Ideapad (Realtek) 12 years ago.

I couldn`t test it using port audio.

2 posts - 2 participants

Read full topic

Here:

https://www.youtube.com/embed/JLlL_h5oeDE

Peace!

1 post - 1 participant

Read full topic

Renoise 3.4.0 is crashing when trying to open an xrns file originally created in 2009. I had the file successfully running with Renoise 3.3.2 as recently as 03/15/2022 when i created a new version and replaced a vst synth I no longer have with Zebra2. Renoise 3.4.0 crashes if the file is opened from finder or internally using Renoise’s own browser.

I had a very similar problem a couple of years ago that was solved in this topic

Running Big Sur 11.6.5 on a 2018 Mac Mini.

Renoise.log (1.8 MB)

1 post - 1 participant

Read full topic

Long time renoise customer / supporter. It’s been ages since i’ve installed a new version of renoise. After installing 3.4 on a new user profile on my mid2015 mbp (10.14.6) fresh it seems i get incredibly slugish responsiveness from any interaction with the renoise interface. UI resize, browse folder tree, transport controls, all pretty unusable out of the gate.
Am i missing something? checkbox for intel CPU or something?

Looking forward to catching up with an old friend (renoise) but for now, back to FT clone, an even OLDER friend! (which by the way runs like a well oiled tracker on any modern computer/os!! amazing imo)

2 posts - 2 participants

Read full topic

I’ve seen this question a couple of times from different people and in different OSes, but I don’t get if it’s the plugins responsibility or the DAW or if the workaraound (at the bottom) is the easies solution.

Example, I’m testning psyscope pro (demoversion), I know this can be resized. I do find the resize corner just above the random button, and i can drag it. This is what happens…

1. Original look (no resize, but marked out the drag-corner):
   

2. Dragging the resize point into the window (to make it smaller). result after releasing button:
   
   (ignore the actual text… demo time expired)

3. Dragging the resize point out of the window borders to make it bigger, result:
   

The window by itself is not resizable, it’s fixed.

BUT!!! If you resize the inner content, close the window, then press “ext.editor”-button again, it has taken the necessary size to house the content. (when in the mixer tab that is, havent tested vstis.)

Is this the solution?

1 post - 1 participant

Read full topic

Hello,
One of the most powerful features in the polyend tracker is the fill feature. It offers a quick yet powerful tool for populating pattern information in useful or surprising ways. I find myself really missing it when using renoise.

https://www.youtube.com/embed/Q_jZj8EXtE8

Updated Instructions of use for Polyend Tracker Digital Audio Workstation Groovebox. Sampler Synthesizer and MIDI sequencer.

1 post - 1 participant

Read full topic

Hello,
A simple fix for a major source of annoyance of mine would be to add bar, 2 bar, 4 bar, etc divisions to the slicer “snap to”.
Or even better, offer the ability to generate slices based on the grid. I’m currently trying to slice up entire tracks with known bpms and the current way involves way too much clicking for my poor carpal tunnel.

1 post - 1 participant

Read full topic