Feed aggregator

Renoise 3.3 still uses the wrong full screen mode on macos, where instead of being a new full screen “virtual destop” like everything else (respecting control+left/right etc), it does something custom, which it shouldn’t be doing.

2 posts - 2 participants

Read full topic

Had an experiment with swells, then I got side tracked and made this thing!

Enjoy!

Editing MIDI curves across two segments is a painful experience, or am I doing it wrong?

1 post - 1 participant

Read full topic

hi,

i loaded an old song, from before my reinstall to new win10.
when loading, renoise 3.1.1 dont just report what vst is missing, it asks me to point to steam.

i dont know which vst use the steam engine, and clearly its not installed.
instead of then just loading the song with missing plugins, it crashes.

i need to know what vst is missing, in order to get my song working… ?

4 posts - 2 participants

Read full topic

I look at the API reference,and it seem not possible to create a list from all registered Renoise instruments and effects…

I’am wrong?

1 post - 1 participant

Read full topic

I didn’t use it since a few years, tried it again yesterday.
Really impressed, I’m currently trying to make a jungle tune in it.

The audio editing is smooth and the interface is really reactive (compared to bitwig…)
makes chopping breaks in audio an almost pleasureful experience.

The things that are missing compared to other daws :

• No “lfo tool” or modulators. I think this is not such of a loss, since there is the lfo automation generator thing. Automation is really well done, you can do automation clips and move them around under your media items. not bad

• No straightforward midi drum machine thing. If you want to control samples by midi, you have to stack instances of the internal sampler and set manually the note for each instance … annoying.

• No integrated slicing. We lose some of the renoise workflow here. No way to quickly try slicing something to see if it sounds good.

• No cool way to do parallel processing. You really have to setup send busses for this kind of things… annoying. Bitwig is clearly the winner there (and Renoise in the sampler).

There is also a cool feature, you can apply effects to “clips”. This is similar to the sampler effect chains in renoise.

In a way those limitations are OK. This makes me more focus about making a track and less about endless sound design sessions like in Bitwig. Compared to Renoise it’s cool to see the waveforms of the breaks you are slicing. I will see what I will come up with it…

4 posts - 3 participants

Read full topic

Hi Renoise folks

Is there a function to play from actual editing position in pattern? Always when i press play Button he start Playing from position 0 of pattern not from actual editing position. thats broke my Workflow.

happy tracking

3 posts - 2 participants

Read full topic

Cant login anymore, password request dont work

Edit: Nevermind, email was in spam folder. But i’m not sure, why the password wasn’t working anymore…

Edit 2: I’ve set a new password and now my login is blocked. It seems login form is broken?!

1 post - 1 participant

Read full topic

Hello all Renoise friends - I’ve been developing this new tune on-and-off over the last couple of months. I went back to it today and made some changes…this is the first time I’m posting it. Let me know your thoughts / suggestions. Cheers for your ears…

2 posts - 2 participants

Read full topic

Free pack of my own presets.
Description on YouTube.
Link: 288 FREE PRESETS - Serum, Phase Plant, Vital - YouTube

1 post - 1 participant

Read full topic

2 posts - 2 participants

Read full topic

Hello,

I was trying to get my guitar to input into Renoise using ASIO4ALL.

I did the following steps:

I set ASIO as my sound driver in the Renoise settings and it didn’t work.
I closed Renoise.
I installed ASIO4ALL.
I reopened Renoise.

I see these two dialog boxes:

CrashBackup here:
Untitled_3_14_2021__23_45_crash.xrns (3.5 KB)

I cannot open Renoise anymore without getting blocked by these dialog boxes. Please advise if I have to reinstall or if theres an easier way to revert the settings!

1 post - 1 participant

Read full topic

On Linux (NixOS), KDE Plasma with scaling enabled, most VST plugins don’t render UI correctly when opened in Renoise.

For example TAL-NoiseMaker - free download but also many other plugins have problem rendering. It seems that UI is scaled but plugins which have fixed dimensions in UI won’t increase are cropped at their 1:1 scale size.

• on the left NoiseMaker opened via Renoise
• on the right NoiseMaker opened via Carla

Note that actual rendered area is of same size in both case but UI from renoise is cropped because it’s scaled:

Steps to Reproduce:

• install plugin that doesn’t support UI resizing like NoiseMaker
• setup scaling in desktop (tested in KDE Plasma)
  
• open VST plugin via renoise

Expected

This is unclear frankly. Ideally the UI would be scaled but not cropped (it would fit the whole window). But I assume the dimensions are probably hard-coded on plugin side so it’s the plugin which cases the problem.

Realistically speaking I think the only feasible solution would be to force scaling in VST plugin windows to 100% as Carla does.

Actual

UI is not fully usable because it’s cropped.

1 post - 1 participant

Read full topic

> Download Drawtomator Tool

Wouldn’t it be nice to just draw something and that would drive some musical changes? The Drawtomator allows you to do this by assigning effect parameters to the X and Y axis of your drawing. However, this is more a proof of concept than a reliable automation device.

Time-wise, a recording won’t be an exact match for what you’ve drawn. Likewise, the timing of the replay can be variable as it’s playing back. This is because timers are used to record the drawing and replay it, but due to the nature of the API these are not accurate down at the level of milliseconds. They are at the mercy of what’s happening with the GUI – mouse movement in particular.

This variability is especially noticeable at lower interval settings. Raising the interval time helps a lot with this, but also makes the recording or playback more coarse, since there’s more time between updates. Although a low recording interval is less accurate it does record more information, which is beneficial when replaying at slower speeds.

When you’ve finished drawing and released the mouse button, this is detected by the snapback feature of the XY Pad. This means it’s possible to accidentally cancel the drawing by going to the Finish Corner. If you need to use the values of a corner in your drawing then you can change the snapback point to another with the Finish Corner option.

The Drawing Colour option lets you choose from three different colours available from the Theme that’s being used. Useful since some can be hard to see, or if you just like the change in colour.

2 posts - 2 participants

Read full topic

Renoise 3.3.1, W10 x64

It seems I have a little GUI visual problem with the switch in a windowed tool.

To reproduce what happens:

1. Create a window tool with a swith, for example include this swith:

renoise.ViewBuilder():switch{ height=21, width=136, items={"1","2","3","4"}, value=1, midi_mapping=("Tools:Map 1") }, renoise.ViewBuilder():switch{ height=21, width=136, items={"1","2","3"}, value=1, midi_mapping=("Tools:Map 2") }, renoise.ViewBuilder():switch{ height=21, width=136, items={"1","2"}, value=1, midi_mapping=("Tools:Map 3") }

2. Select Renoise window and Press CTRL + M. The switch object must be fully marked. However, it will only mark the first 2 items:
   

I think this does not happen with the Renoise window. So it’s probably an API problem, with the window tools and the switch object.

1 post - 1 participant

Read full topic

Sun - Passage

that’s the fastest BPM i did so far.

Nexus, Rmx, Omnisphere, Spire.

hope you’ll enjoy.

i think it’s one of my favorite but i might be biased.

1 post - 1 participant

Read full topic

Sun - Screamtronic

made exclusively with Nexus 3

1 post - 1 participant

Read full topic

Hi. New guy here, with the first post and feature request: please add the phrase editor Vol/Pan/Dly/FX toggles with accompanying hexadecimal sliders to the pattern editor. As a new guy I’ll be coming to grips for some time with both the various commands and the hexadecimal system. It’s nice that each toggle has its own specific list of commands, and sliders help a LOT with the process of inputting values. And the whole time I can learn and get good enough to just know what to enter. Sound good or am I missing something? Thanks-

1 post - 1 participant

Read full topic

here’s what I have, but I can only get it to modify note columns in Track 1… feel like I’m missing something incredibly obvious. (changing delay value is just a placeholder for now)

edit - … I’ve been sitting there with only Track 1’s delay column visible, lol. classic tunnel vision and then figure out the problem right after you ask for help

edit 2 - oops, meant to post this in Beginners LUA API Sandbox. my bad

local sel_pattern_index = renoise.song().selected_pattern_index local start_track_index = renoise.song().selection_in_pattern['start_track'] local end_track_index = renoise.song().selection_in_pattern['end_track'] for track_index = start_track_index, end_track_index do for pos, note_column in renoise.song().pattern_iterator:note_columns_in_pattern_track(sel_pattern_index, track_index) do if note_column.is_selected then -- do stuff note_column.delay_value = 42 end end end

edit - better, I think:

local sel_pattern_index = renoise.song().selected_pattern_index local start_track_index = renoise.song().selection_in_pattern['start_track'] local end_track_index = renoise.song().selection_in_pattern['end_track'] for track_index = start_track_index, end_track_index do local curr_track = renoise.song():track(track_index) if not curr_track.delay_column_visible then curr_track.delay_column_visible = true end for pos, note_column in renoise.song().pattern_iterator:note_columns_in_pattern_track(sel_pattern_index, track_index) do if note_column.is_selected then note_column.delay_value = 42 end end end

1 post - 1 participant

Read full topic

Hello,

I am having an issue where I can’t get the Windows plugins to work through Carla and Wine on Renoise Linux. I had this thing working alright just a week ago, but I recently updated my system and Wine started crashing when Carla tried to load the Windows plugins. It turned out that I had to downgrade Wine to version 6.2 from 6.3 to somewhat fix things.

However, after the update I can load Windows plugins on the Carla standalone application, but when I load the Carla rack on Renoise, the “Available tools” in the refresh dialog for plugins does not have support for the carla-discovery-win32, carla-discovery-win64, etc. So there’s no way to use the Windows plugins on Renoise. It just feels weird that now the standalone application works properly but the Renoise plugins are missing certain components, I guess.

I am not really understanding from which directory Renoise pulls the Carla plugins, since the only active environment variables are VST_PATH and VST_PATH3 which both point to ~/.vst, and that location only have my native Linux plugins.

Running Manjaro Linux with these packages installed:
carla-bridges-win 2.2.0-1
carla-git 1:2.3.0.RC1.r11.ga08ed288b-1
wine 6.2-1

I have tried other combinations of the available packages for Carla but this seems to be the only one working at all.

1 post - 1 participant

Read full topic

Why no “176.4 Khz” for final rendering?

1 post - 1 participant

Read full topic