Forum
Shortcuts on a laptop?
@charlizesen1 wrote:
I am new to renoise and loving it. The only thing that’s limiting me is that all the shortcuts to selects instruments and ovtave up and down are on the numpad. I know i can remap them but was wondering if there is laptop mapping somewhere that people use and everybody knows about.
Posts: 1
Participants: 1
Renoise iOS - again
@RyanIzaguirre wrote:
I see a suggestion from back in june 2017. its feb 2k20 iOS has grown incredibly along with the power of iOS devices. I love korg gadget, its sick, and demonstrates even an iphone XR is a device capable of legit high quality audio production. Gadget is the best available but if i had access to the capabilities of renoise along with all the great iOS audio units on the go it would revolutionize creation for myself and surely quite a few other people. The touch interface could be utilized in fun and interesting ways and thus increase the potential for renoise as a live performance tool considerably. Is it time for this yet in anyone else’s minds ?
Lets brainstorm on how to best add touch controls to renoise for the better and see what this community can come up with. obviously time shouldn’t be wasted on an android port, they just don’t pay for stuff on that platform, not a comment on quality just the behavior of users.
Posts: 1
Participants: 1
New Computer [musing]
@rainydayshirts wrote:
Ordered a Razer Blade Stealth with the 4K display. This little guy is great! $1699.99USD (on sale $300USD off right now). Surprisingly good battery life. Renoise runs great on this rig. As does Reaper. I used the “Artificial Bell” builint instrument as a benchmark, as this instrument uses an insane amount of CPU on all of my older rigs. On my Core2 QX9300 overclocked to 2.8GHz, that instrument will cause 100% CPU usage if you play anything complex with it. On this rig it maxes out at around 30% CPU usage. The display is beautiful. I’m looking forward to doing some “untethered” sound design, courtesy of this little beast.
All in all I’d have to say I can recommend this unit to anyone looking for something portable with decent power and minimalist aesthetics.
Posts: 1
Participants: 1
Disabling/Bypassing doofer doesn't disable contained VSTfx's
@toimp wrote:
I’m using my typical Master chain as doofer, which i’m sometimes disable to save cpu. But the VSTs inside the doofer stays active, there is also latency compensation applied. Is it possible, that disabling a doofer disables all nested VST plugins, too?
Renoise 3.2.1 64bit, Windows 10
Posts: 1
Participants: 1
Collapse sections in Pattern Sequencer
@Strotch wrote:
It would be great to have the option to collapse down sections in the pattern sequencer, with only the patterns in the current section showing. Similar to how in the pattern editor you can hide every track but the currently selected one.
This would make it a lot easier to keep track of sections and patterns in expansive modules. Attached a mockup below.
Posts: 1
Participants: 1
Renoise stock samples are FLAC?
@lrmoniz wrote:
Hello forum,
I have a question:
Since Renoise’s stock samples are FLAC, will there be any issue with mixing different file formats into my project? Am I actually supposed to convert Renoise’s samples to WAV? Are there technical consequences to not doing so?
Thanks! I’m still checking out the demo version of Renoise, and would like a little clarification on this.
LM
Posts: 1
Participants: 1
Looking for someone who can create a renoise tool for $$$
@ineedsomeluck wrote:
As the title says , i would like to have a custom tool created , which would be a piano roll.
Posts: 5
Participants: 3
Renoise 3.2.1: create all BMP icons at 125% scaling
@Raul wrote:
Probably, many of you don’t know anything I’m going to comment on here…
Currently, Renoise v3.2.1 has a small problem with the icons for scaling of 125%. It is a subject, say, “hidden.”
When the Renoise executable is loading a new instance, it need to read the BMP icons in the folder (Windows 10): C:\Program Files\Renoise 3.2.1\Resources\Skin\Icons
Focusing attention on a icon, for example the first one, called AdvancedEdit:
- AdvancedEdit@4x.bmp (with @4x at the end of the name)
- AdvancedEdit.bmp
Renoise use this icon for scaling between 350%, 300%, 250%, 225%, 200%, 175% and 150%.
Actually, @ 4x is the actual size for 400% scaling, which is not available. Therefore, the image size of each icon is always larger than the scaling size. In all these cases (except some), the icon is reduced in size, and it looks good.
AdvancedEdit.bmp (scaling of 100%)This icon is used for scaling of 100% and 125%.
This case is different. The icon size for 125% scaling is the same as 100% scaling. So, for Renoise it takes the size of 100% for the scaling of 125% without increasing it, causing imbalances everywhere in each icon, in addition they look 25% smaller. If you increase the size, it would look worse, so use the original size of 100%, without scaling it to 125%.
PropositionThe idea is, I ask, if the community is interested in taking the icons from the folder "C:\Program Files\Renoise 3.2.1\Resources\Skin\Icons"and converting them 25% larger.
An example to do it correctly:
Take the icon AdvancedEdit.bmp, with dimensions 15 x 32 pixels and convert it by multiplying the dimensions by 1.25. The resulting icon should be edited so that it looks visually perfect, with the dimensions of 19 x 40 (always rounding up):
- 15 x 1.25= 18.75 pixels --> 19 pixels
- 32 x 1.25= 40 pixels
The resulting icon should be named like this: AdvancedEdit@1.25x.bmp (with @1.25x at the end of the name). Repeat the process for all BMP icons.
In fact, Renoise can load specific icons for each specific scaling like this:
- AdvancedEdit@3.5x.bmp for 350% scaling. Ok with @4x
- AdvancedEdit@3x.bmp for 300% scaling. Ok with @4x
- AdvancedEdit@2.5x.bmp for 250% scaling. Ok with @4x
- AdvancedEdit@2x.bmp for 200% scaling. Ok with @4x
- AdvancedEdit@1.75x.bmp for 175% scaling. Ok with @4x
- AdvancedEdit@1.50x.bmp for 150% scaling. Ok with @4x
- AdvancedEdit@1.25x.bmp for 125% scaling. No ok!
- AdvancedEdit.bmp for 350% scaling. Ok without @a.bcx
The intermediate values of 350%, 250%, 175%, 150% and 125% are the most conflictive (they can be blurred if they are not built well). But Renoise does a good job on most icons with @4x to cover the range of 350% to 150%. It would only be to create the new icons for the 125% scaling with @1.25x.
For them to work, you only need to enter the new icons in the folder: C:\Program Files\Renoise 3.2.1\Resources\Skin\Icons
The 125% scaling is suitable for monitors with resolutions between FullHD and 2K.
Does anyone want to have fun building icons for 125% scaling? The idea is to create a package to be installed by any Renoise user if need it…
Posts: 2
Participants: 2
Sun - Synthoids (very electronic ;))
Combi / Sequence presets like Nexus VST
@jdxing wrote:
Love to use Nexus preset sequences to get inspired and building ideas. Are there other VSTs that offer this kind of feature? Thanks.
Posts: 1
Participants: 1
Multiple Master Midi Clock Outs
@dleted wrote:
Renoise currently allows a single device to be chosen as the destination of the midi clock and start/stop controls. Seeing how many midi devices these days have built in clock-able components as well as onboard sequencing, it would be very useful to have more than one destination given the popularity of hardware these days.
A couple of ways to solve this:
- Allow multiple devices to be checked under the midi preference page
- Add a checkbox next for midi clock and start/stop under a midi instrument’s settings
I’m sure I’m not the only one who would enjoy this feature!
Posts: 1
Participants: 1
Instantiate FAILED (failed to load the DLL - error: 126)
@jarzu3 wrote:
Has anyone got any experience with this error. My plugin wont show up. If tried reinstalling renoise / wiping the cachedvst and cachedfailedvst. If tried reinstalling the plugin but both don’t seem to work. Anyone else got any ideas?
Posts: 1
Participants: 1
Oxe FM Synth installation
@stoiximan wrote:
This little synth is amazing i recommend it to everybody.I use it all the time in windows but i cant
get it to work in linux pop os- ubuntu.I placed the .so file in my vst directory but its not working.In the archive i downloaded there is no install sh so what to do?Here is the official repository
Posts: 1
Participants: 1
Covid-19 (Corona virus)
@TheBellows wrote:
Things aren’t going too well in Wuhan. This video is apparently from an independent guy inside wuhan showing how the situation really is.
Not for children.
Posts: 1
Participants: 1
Renoise -> JACK - Bitwig
@Steven_Blair wrote:
Hopefully someone can point me in the correct direction.
I want to achieve the following:
I press start in Renoise and my other music App (Bitwig) starts at the same time
Not having much luck looking online for help, so either I am away down the wrong path, or just doing something wrong.
OS: Windows
I have tried using JACK, but that appears to to only detect Bitwig (and I am not entirely sure JACK is what I need)
Any would would be appreciated.
Posts: 1
Participants: 1
First track made with Renoise
@kriyananda wrote:
Dearest Friends, here’s my first track I composed with Renoise. I hope you like it, it was SO fun to put it together. I am very grateful as well to you guys, this forum is a huge source of help and inspiration.
So, this is some electronic ambient music, with samples taken from two tracks I love, and a spray of breakcore here and there…
Feedback and (constructive) criticism are obviously more than welcome!
Posts: 1
Participants: 1
Sun - Shore (chill electronic)
Nagz renoise LIVE musicmaking
@nagz-again wrote:
Hey there, nagz here, again (forgot my old renoise forum access so had to re-register).
Now I am streaming live how I make tunes in Renoise, tune in: twitch.tv/naaaaaagz
See you there
Posts: 1
Participants: 1
Jack server help Linux
@stoiximan wrote:
So i have installed pop os an ubuntu linux distro and also installed jack with the following commands.
apt-get install qjackctl pulseaudio-module-jack
Then configure qjackctl to run the following command after startup. Copy it into “Setup…” > “Options” > “Execute script after Startup”:
pacmd set-default-sink jack_out
then sudo editing the /etc/pulse/default.pa file to include two lines under the load audio drivers manually section:
load-module module-jack-sink
load-module module-jack-source
This works perfectly now, no matter what app i have open they all have sound.The problem is i cannot control the global volume in pop os.Any help guys?
Posts: 1
Participants: 1
Tips on Sampling vst
@bunja1979 wrote:
im asking here complete beginner
like after ive sampled a vst or sound
can i add pitch bend ( whats a good value )
and what are some good settings for sampling pads or bass or leads cheers people !!
also for sampling stuff with velocity layers like a piano any tips ?
of course this is just for my own use to save cpu cheers
Posts: 1
Participants: 1
Pages
