Feed aggregator

Hi, everybody! Can anybody explain me how to use “/renoise/trigger/midi” command through OSC?
According to docs, it expects number, so I tried, for example, 0x903C64 as integer (which is note-on message on channel 1, note 60, velocity 100), but nothing happens. Ideally, I would like to send CC messages, as it seems there is no endpoint for them in protocol.

1 post - 1 participant

Read full topic

I’m just curious. sorry

I’d like to ask why when you load a project the song appears to use relatively very high CPU usage (in my test case 70%) when merely just loaded, a reset/panic by right-click the stop button makes it fall back to ~3%. Why isn’t Renoise started in this panicked/low CPU usage state?

I have a song that reaches max-CPU threshold and Renoise are supposedly doing a panic reset automatically but when it happens it stays high and only fall to around 60%, isn’t it supposed to go to ~3%? is it doing some form of mild panic?

Lastly we all know Renoise CPU usage percentage does not correspond very precisely to the numbers in Win10/Resource Monitor, I wish it made sense because looking at all the CPU cores make you think it’s currently a very inefficient state of affairs for multithreaded applications… Can I ask how Renoise calculate the CPU usage number? (see uploaded image)

1 post - 1 participant

Read full topic

Found an interesting article about the well known open source Audacity audio editor.

An independent news site that covers open source software recommends uninstalling Audacity ASAP.

1 post - 1 participant

Read full topic

From time to time (rarely but happens) Renoise renders… silence. Just silence, all zero bytes result. When I render song again - it render ok.

I wonder - what is upgrade plan for Renoise? More often bugfixes or cumulative update every x years? Becuase despite many suggestions, bug reports I’ve read on this forum, I don’t see any new versions informations or even answers with any information that anyone work on 3.3.3. So maybe all that bug reporting and sharing new ideas is just unnecessary?

1 post - 1 participant

Read full topic

So, I may have commented on the PadSynth module before, not sure if anybody saw it. Also, I can’t find “drakmaniso”, the maker of this synth. He’s not been on the forum for years, nor in the various places on the Internet that I could find him, and there were several. Could use an update with a ‘random’ button to adjust the various sliders in random ways for even greater tonal output.

PadSynth is an extremely important sample generator. The types of sounds it produces are based on the Paul Nasca synthesis techniques (PaulStretch is his amazing sample-stretcher) and the sounds that PadSynth can make are just stupendous. Absolutely beautiful.

I have used a VST3 by a fella named Ryukau off of GitHub that makes sounds that are based off of this synthesis method; again, the sounds are just out-of-this-world. Watch and listen to this!

So, the PadSynth Tool can make these sounds, but they are not easy to do, because the sliders have to be dragged and there’s 256 of them. Very handy for being tidy, but not for exploring new sounds. Would anybody be up for the challenge of adding a random button for the sliders? “drakmaniso” is nowhere to be found, and an adjustment for something so useful can’t be stepping on any toes.

1 post - 1 participant

Read full topic

Hi. I’ve read as many articles as I can find but no answers, so posting here. I want to glide a note a full octave in 64 steps. I could do this in Octamed but 25 years later can’t figure out how to do it in Renoise! I’ve tried G and U commands but there’s no interpolate option and I’m giving up on trial and error now. Any help would be great. Thanks.

3 posts - 3 participants

Read full topic

Have you guys followed this topic on gearslutz
It is nothing short of amazing ( all in afew months time )
A group of coders have emulated the motorolla cpu ( as used in lot’s of early 90’s va ) and have it running in real time , the original acces virus algos from the rom set

Emulating the Access Virus C & other virtual analogue synthesizers

Last week I had this crazy idea and thought I would share it across a few sites to see what the...

1 post - 1 participant

Read full topic

Hi,

it seems I’m encountering a bug in Automation Envelopes when I copy envelopes.

When using Envelope Type “Lines” selecting, copying and pasting works fine:

But when I use Envelope Type “Points” the last point is missing after paste:

So I have to make the selection area one step further/behind the last point in the grid to get all points till the last one copied/pasted:

Could someone please explain this behaviour to me or is this a bug?

Many thanks
Denny

1 post - 1 participant

Read full topic

Hey, folks - 'bout time we had a new one from me…been lacking in motivation a bit lately.

Actually it’s a completely re-worked old one (different instruments and some differences in composition). Uses Synthmaster 2.9 and a couple of old sci-fi samples.

Let me know what you think; what would you have done differently?

1 post - 1 participant

Read full topic

Morning Routine A - Breakfast Company

Be inspired - make it better!

1 post - 1 participant

Read full topic

From the log file;

"Player: Constructing…
Player: Creating slave threads…
Player: 8 threads enabled. 8 CPUs are available.
Player: Start running…

GUI: Creating the Document GUI…
GUI: Successfully constructed

Application: Successfully loaded template document.

GraphPort: Initializing in FullscreenMode

Graphport: Running fullscreen at ‘0,0,1920,1080’…

GraphPort: Successfully initialized

Application: Init OK
Application: Enter MainLoop…

Vst3Plugs: Instantiating: C:\Program Files\Common Files\VST3\Solina2K (64).vst3…
Vst3Plugs: Failed to apply initial controller state to controller (not critical)

MIDI: Rescanning MIDI devices…
MIDI: Enumerating DirectMusic (WDM) MIDI devices…
MIDI: Skipping emulated WDM device ‘Microsoft MIDI Mapper [Emulated]’
MIDI: Skipping emulated WDM device ‘Microsoft GS Wavetable Synth [Emulated]’
MIDI: Skipping emulated WDM device ‘Scarlett 6i6 USB [Emulated]’
MIDI: Skipping emulated WDM device ‘Automap MIDI [Emulated]’
MIDI: Skipping emulated WDM device ‘Automap Propellerhead Mixer [Emulated]’
MIDI: Skipping emulated WDM device ‘Automap Propellerhead [Emulated]’
MIDI: Skipping emulated WDM device ‘Scarlett 6i6 USB [Emulated]’
MIDI: Skipping emulated WDM device ‘Automap MIDI [Emulated]’
MIDI: Skipping emulated WDM device ‘Automap Propellerhead Mixer [Emulated]’
MIDI: Skipping emulated WDM device ‘Automap Propellerhead [Emulated]’
MIDI: Skipping softsynth WDM out-device ‘Microsoft Synthesizer’ (not supported)
MIDI: Skipping emulated WDM device ‘VI61 [Emulated]’
MIDI: Skipping emulated WDM device ‘MIDIOUT2 (VI61) [Emulated]’
MIDI: Skipping emulated WDM device ‘VI61 [Emulated]’
MIDI: Skipping emulated WDM device ‘MIDIIN2 (VI61) [Emulated]’
MIDI: Enumerating Windows MME MIDI devices…
MIDI: Adding MME in-device ‘Scarlett 6i6 USB’
MIDI: Adding MME in-device ‘Automap MIDI’
MIDI: Adding MME in-device ‘Automap Propellerhead Mixer’
MIDI: Adding MME in-device ‘Automap Propellerhead’
MIDI: Adding MME in-device ‘VI61’
MIDI: Adding MME in-device ‘MIDIIN2 (VI61)’
MIDI: Adding MME out-device ‘Microsoft GS Wavetable Synth’
MIDI: Adding MME out-device ‘Scarlett 6i6 USB’
MIDI: Adding MME out-device ‘Automap MIDI’
MIDI: Adding MME out-device ‘Automap Propellerhead Mixer’
MIDI: Adding MME out-device ‘Automap Propellerhead’
MIDI: Adding MME out-device ‘VI61’
MIDI: Adding MME out-device ‘MIDIOUT2 (VI61)’
MIDI: Finished device enumeration
MIDI: Opening MME Midi-In device ‘VI61’

Vst3Plugs: Instantiating: C:\Program Files\Common Files\VST3\Newfangled Audio\Pendulate.vst3…
Vst3Plugs: Failed to apply initial controller state to controller (not critical)
Vst3Plugs: Releasing: Fanan: Solina2K…
"

I tried to start up the Pendulate vst 3 plugin ( Pendulate by Eventide - Synth Plugin VST3 Audio Unit AAX ) in the instrument slot where I had already opened up Solina2K (64).vst3 ( Solina2K by Fanan Team - Solina emulation Plugin VST VST3 ). Then Renoise crashed without a warning notice.

1 post - 1 participant

Read full topic

Hi there, I’m having possibly quite a noobish problem in Renoise 3.2.1. I have a sliced sample of a break that consists of 2 bars (8 beats) at 12 LPB. I have the beatsync value set to 96 lines and everything is fine when I playback the whole sample. However, after slicing the sample and clicking “Render slices to phrase” I always get a phrase that only lasts 1 bar, so that the whole 2 bar sample is effectively played twice as quickly. I see that expand seems to (almost) correct this, but I don’t think the offsets are calculated correctly as it sounds like there are gaps between the samples.

I’m sure it’s something obvious that I’ve missed but any help would be greatly appreciated!

1 post - 1 participant

Read full topic

Free Goodies!

The KVR Audio Developer Challenge 2021 is the eighth free-for-all audio plug-in / audio application / soundware design event!

" Welcome to the KVR Developer Challenge 2021, the eighth free-for-all audio plug-in / audio application / soundware design event.

The "KVR Developer Challenge" is for anyone who develops Audio Plug-ins or Applications and Soundware. The challenge is to create and release a brand new free audio plug-in, application or sound library / pack / set that will benefit the community at large.

Creativity is key, it can be as simple or as complex as you want - KVR members will vote on the entries and pick the eventual winner using whatever criteria they choose to.

Five cash prizes will be awarded to the top entries and a wildcard pick. Prize moneys are sponsored by the community-funded KVR Developer Challenge 2021 donation pool.

The KVR Developer Challenge began in 2006 and has occurred every 2-3 years ever since. It’s delivered gems such as ProF.E.T. by Ignite Amps, Deducktion by Dead Duck Software and MPS by Full Bucket Music back in 2018, Youlean Loudness Meter, Lagrange by Ursa DSP and Spaceship Delay from Musical Entropy in 2016, Multiply by Acon Digital, Nova-67P by vladg/sound and Emissary by Ignite Amps in 2014, and so it goes on…

Check out 2012, 2009, 2007, and the original in 2006 when Triple Cheese by u-he won the show!"

1 post - 1 participant

Read full topic

Hey guys.

Since I’m going to be out of town in a couple of days i, I’m just focused on getting as much music just out the door before leaving. So i thought I’d finish up this file that i stopped working on last month or so.

My mouse up and died on me, so I’ve gotten a little more comfortable with really taking advantage of the keyboard shortcuts in Renoise. Honestly, i think it’s made me a little more efficient and faster when it comes to actual workflow in the program.

Since I’m just trying to get tracks out the door, I’ve really been trying to take to heart fast decision making, and really trying not to obsess over really small details and instead, focus on simply getting a tune out as fast as possible.

Just like with the other post i put up about a month ago, I’m sticking to 4 tracks only, I’m really starting to dig the limitation. It honestly feels like producing with rule has made working on a track more intuitive and simple, but in a good way.

As always, any feedback you feel like you’d want to share, feel free to, composition, mixing, a specific section, anything like that.

Well, thanks for reading this little rambling, thanks for giving a listen and i hope you enjoy.

1 post - 1 participant

Read full topic

Description of the problem:

So, I’ve recently purchased and downloaded Renoise (last month I think). And it was working fine until it started to have bugs almost everytime I tried to used it (I have some screenshots here: Captura-de-Tela-195 — ImgBB, Captura-de-Tela-196 — ImgBB but overall there were so many bugs that I just gave up, anyways)
So I had enough and wanted to report about this new bug that won’t let me work, for some reason Renoise is presenting random freezes (example: 2021-06-29 16-53-59-1 in the video you can see it has nothing to do with a vst or cpu/ram consumption) it just freezes the grid, it doesn’t let me scroll/play/pause.

Steps to reproduce look like this:

I dont have a clue, it’s random, sometimes it works sometimes it doesn’t. I don’t think there’s a constant (not that I’m aware of), it just happens. A few minutes ago I tried opening and closening it 3 times to no avail (when I decided to record the video above). The other DAWs I work (Reaper and Live, use the same audio settings in every DAW) are working just fine. I’m on Windows 20H2 (if that matters). I’m going to reinstall it again (I’d made a clean reinstall when the bugs first started). I’m kinda disappointed since it prevents me from working but this is a bug report and I’m aware it’s besides the point so I apologize if I talked too much.

EDIT: restarted my pc and its working fine for now, didn’t have to go through the reinstall

1 post - 1 participant

Read full topic

Hello All, I have noticed the salary of php developer is low as compared to other profiles like python developer, java developer and so many. So I want to know Is Python better than PHP? I have enjoyed PHP for a long time but I have never taken a job in PHP due to what I hear about salaries.

1 post - 1 participant

Read full topic

Hi together!

I want sync a Drumloop sampleplayback with BPM Value instead of Patternlenght. How can i do this? Vst’s scale with BPM Value, but Drumloop does not.

happy tracking

1 post - 1 participant

Read full topic

Hi all,
I’e just finished an article for sonicstate on hardware modifications - I had to keep the list down so there may be a part 2!

Add-ons, expansions and hacks to enhance your gear

Enjoy
Chris

1 post - 1 participant

Read full topic

Hi, Windows 10 Enterprise Edition… 10th gen Core i7, 16 megs ram, ssd… Renoise 3.3.2

Dragging VST3 effects to the track can be done, but it doesn’t seem to be smooth, and sometimes it doesn’t work, and I have to select the track in the mixer and double click on the effect

1 post - 1 participant

Read full topic

Hi there.

I have been trying to use Carla v2.3.0 VST on Renoise for windows (on Windows 10) but it seems it is not detecting it correctly. Instead of showing the different list of carla plugins in the list, it shows just the shell file (it uses a shell vst file system, similar to Waves plugins). If I try to load it it just crashes Renoise.

It shows and loads fine in any other DAW or VST host I have tried (for instance, Kushview Element or Waveform 9 and 11.5).

Carla by the way is a very interesting and useful open source plugin host with both rack and modular functionality. So it could be a really useful “addon” to use in combination with Renoise.

The thing is I have been reading here in the forum about people talking in relation to it working through wine in the linux version of Renoise.

So I would like to know if this is something that is not working only for me or is it something that needs to be fixed in Renoise for windows ?

Thank you very much.

1 post - 1 participant

Read full topic