Feed aggregator

If using pitch slide down on a sample which has Beatsync enabled in “texture” mode, an artifact (pop / crackle) will always occur as soon as the sample has been pitch slided 6 halftones downwards.

see the example file attached. error will occur in pattern 2
pattern 0-1 are just to prove that the sample itslef sounds clean.

artifacts do not occur if pitch slided up
artifacts occur if portamento to note is being used

assumption: this behaviour did not occur in versions prior to v3.4.2, as songs rendered with older version sound fine in places where 3.4.2 generates pops as descriped above.

texture_mode_slide_down_faulty.xrns (666.0 KB)

1 post - 1 participant

Read full topic

Hi there,

New to Renoise, I’ve been tracking on the Dirtywave M8 for a year and want to check out Renoise!
But I’m also new to Macintosh (just bought a laptop for work) and I don’t understand how to install Renoise on an external SSD.
I’ve downloaded the demo, and put the install program on the external drive. When I launch it from there, it just opens a blank window with Renoise and a few tutorials, and I can directly launch Renoise from this window. But I don’t see any application on the Mac. I can only see the Renoise folder in the Documents, containing the User library forlder.

So I don’t understand: is Renoise only located on the external disk? And is there a way to move the Renoise folder directly on the external drive? I’d like to have a clean portable install on the external drive with nothing on the ocmputer (I have very low storage on this crap).

Thanks a lot for your help!

1 post - 1 participant

Read full topic

i recently got an inspiration for my 11th EP, and quickly whipped up these tracks. they’re still works-in-progress, but they have enough variety and some interesting hooks.

the genre is ‘drumspam’.

1 post - 1 participant

Read full topic

When was the last message of taktik?

4 posts - 2 participants

Read full topic

I’m using phrases with SurgeXT for synth sequencer lines like oldschool Roland TB-303 acid synths. It works great with things like accents and staccato-gated notes. But I couldn’t find a way to do glides from one note to another. It will be possible if I can somehow automate SurgeXT portamento value from the phrases with a command, but it seems not possible to do that.

I know I can do this with an instrument automation on the track effects side, but I want the sequencer stuff to be confined to phrases. It will be too decoupled from the actual notes and will be difficult to maintain.

Is there any other way to achieve this? Thanks a lot.

1 post - 1 participant

Read full topic

https://www.youtube.com/embed/4nB0f0SFq2U

1 post - 1 participant

Read full topic

Sorry for this basic question guys & gals, brand new here. What’s the fastest way to input commands at full velocity w/o using a midi controller? Take for instance I just want to enter a kick drum on track one. I thought I heard someone say it’s the Escape key but that seems to just turn edit mode off/on.

1 post - 1 participant

Read full topic

I made a video essay on art and artificial intelligence. Examined through the lens of the Ghost In the Shell anime from 1995.

If that sounds interesting you, have a look:

https://www.youtube.com/embed/e_mHw_AgauA

1 post - 1 participant

Read full topic

Hy there,

can the RENOISE team include such a feature like FAUST programming language for renoise?

it is so genious and simple.

please look at the webpage https://faust.grame.fr/ .

Thanks a lot for the new and great upcomming features.

Yours sincerely

Brazor0

1 post - 1 participant

Read full topic

On rare occasions Renoie hangs when drag-dropping tone projects unisum compressor .
The log file shows ths
Vst3Plugs: Instantiating: C:\Program Files\Common Files\VST3\Unisum.vst3…
Vst3Plugs: Failed to apply initial controller state to controller (not critical)

1 post - 1 participant

Read full topic

I installed renoise on my new laptop the 20th august 2022 , Studio One was installed the 3th october .
There is a Studio one license file called " renoise" in Renoise/roaming/dir.
What’sup with that ?

1 post - 1 participant

Read full topic

On Ubuntu I’m having some issues with loading presets with wavetables. Sometimes the presets are only loaded correctly when I open the GUI of Hive. Hive 8676 is working fine and the problem shows up only with newer versions. Here is what’s happening

https://vimeo.com/484895117?embedded=true&source=vimeo_logo&owner=92059627

Is anyone observing this as well? It’s happening with VST 2 and VST3 versions of Hive. U-he is aware of this but only me seems to have this problem.

1 post - 1 participant

Read full topic

Hello everyone,

I am trying to get Reason Rack working on mac.

VST3 opens fine on the first initialization, but if I close the plugin UI, then it will not open again.

The AU version of the plugin UI works quite well, except it produces no audio and receives no MIDI.

Has anyone run into anything similar?

Renoise 3.4.2
Reason 12
Mac OS Monterey 12.5.1

Thank you!

1 post - 1 participant

Read full topic

Since updating to 3.4, Renoise continually keeps ‘Rescanning Audio Devices’ every few seconds, causing small freezes and stutters.

I run two RME HDSP Multiface II’s on my system, and two iConnectivity mio10 MIDI devices. It seems the unified ASIO/MIDI driver for the mio10’s are the culprits for this problem - solved by uninstalling and reinstalling the driver. Sadly, if the unified driver isn’t installed, I can no longer see the mio10’s as MIDI inputs in the MIDI device list Renoise populates.

I’ve tried ticking ‘Ignore request from driver’ tickbox in audio settings, but this doesn’t solve the issue. For now, I’ve had to go back to 3.3, as this doesn’t do the ‘Rescanning Audio Devices’ constantly.

What was changed between 3.3 and 3.4 to cause this?

1 post - 1 participant

Read full topic

1 post - 1 participant

Read full topic

I am in a financial jam at the moment so i must sell some stuff unfortunately.Pm me if interested or find me in facebook Redirecting...

PC- 8 months old.Active warranty 28 months left—900 Euros

Case
Kolink Observatory
Cpu
AMD Ryzen 7-5700G
Mohterboard
A520 Pro Max
RAM 16GB DDR4
Hard Disc
512GB SSD
Gpu
nVidia RTX 3060 12GB-GDDR6
Gigabit 10/100/1000Mbps
Power supply
650 Watt 80+ Bronze
Windows 11 pro unregistered

Laptop 4 months old.Active warranty 20 months left–600 Euros
IdeaPad Gaming 3 15ACH6 15.6

Display
15.6" // FHD // IPS // 120Hz
Cpu
AMD Ryzen 5 5600H-CPU Cores 6-Threads-12
RAM
8GB DDR4 3200MHz.Can be expanded
Gpu
GeForce GTX 1650-- 4GB-GDDR6
Hard Disc
512 GB SSD
Windows 11 Home 64-Bit Registered

Korg Electribe 2—250 Euros

1 post - 1 participant

Read full topic

I just set up a new machine and spotted a possible bug.
Renoise 3.4.2
Windows 11, Intel Core i7 12700k

Description:
When opening a VST/VSTi to its external editor (=its own window/interface) and then double clicking somewhere to type in parameters, Renoise keeps Keyboard Focus in the instrument list simultaneously. This causes the instrument to play out loud, while data is being typed in.

Steps to reproduce, expected / actual results:
Open a VSTi such as u-he Diva or a VST such as FabFilter Pro-Q. The same issue applies to both VST2 and VST3 versions.

-Click to open u-he Diva’s presets (inside its own interface) and search for a preset by typing something with the keyboard; each key press now also plays the synth out loud.

-Click to open FabFilter Pro-Q, double click to set a new EQ point - then instead of dragging with the mouse, double click to type in a value (Freq, Gain, Q) with the keyboard. Again, each key press also plays the sample or synth (which is currently selected in the instrument list - of course if nothing is selected there, nothing will play) - so if I type in 2.5dB, you will hear C# (2), D (.), F# (5).

What it -should- do is stay silent while typing in data and return to normal (audible) mode after having pressed enter (finished typing in).

1 post - 1 participant

Read full topic

When working in the sampler and after unplugging my headphone (to hear sounds through speaker), Renoise (Windows 11) seems to freeze up every time stating “Scanning for MIDI devices…”. This takes very long (1-2 minutes) and afterwards the whole program doesn’t seem to work anymore. Some menus work, but some will cause the app to freeze up again or make Renoise crash. Samples and songs won’t play back at this point. The same happens the other way around, when plugging in a headphone. Does anyone else have this problem, or better yet, a solution Thanks!

1 post - 1 participant

Read full topic

Hello, anyone interested in trying an early version of a tool for calculating intervals and consonance values? I use it for learning purposes together with PianoTeq. Pls. refer to the description on GitHub: GitHub - ank19/renoise-interval: renoise(tm) tool to analyze intervals
Thanks.

2 posts - 2 participants

Read full topic

Please can U add something like a patchbay such as in fruityloops and bitwig.
We think thats a great idea for the RENOISE DAW to be universal and widespreading in the MUSIC Community.
Can U Please look at the programms such as BESPOKE or PURE DATA or USINE.

Thanks a lot for the Renoise Produkt, which is very precise but it should be further more easier like childsplay.

Yours Sincerly

Brazor0 and Co.

1 post - 1 participant

Read full topic