Forum

@lilith wrote:

Stupid question: Renoise is located in ~/rns_3_1_1_linux_x86_64 on my system. I can execute it with ./renoise while being in that path. But how can I execute it from everywhere with just the command renoise? I tried to include the folder in my path variables, but it doesn’t work.

Posts: 1

Participants: 1

Read full topic

@milkyheart wrote:

opener track from my upcoming mixtape.

since first uploading, i’ve had more sessions with this track and made improvements based on listener feedback. it’s maybe 80% done at this point, the biggest issue is the lack of bass frequencies. the length has stealthily climbed over 3 minutes in the process…

now’s a good time to check it out!

Posts: 1

Participants: 1

Read full topic

@LofiMat wrote:

Strip-o-mat was moddelled after a discount plugin which i buyed cheap online and what didnt seem to special at all. It is pretty decent after I tried to recreate this in Renoise it turned out the limititations of renoise/doofer too.

Here the description of the idea-giver:

_
Space Strip is a multi-effect plugin featuring 6 modules: Contour, Vibe, Slapback, Ambience, Ensemble, and Stereo. The modules can be arranged in any combination by simple drag-n-drop. Space Strip will add depth and space to your sounds, especially synth and keyboards. The plugin is optimised to be lightweight on the CPU._

Here my new (simple vers.) Doofer:
#STRiP-O-MAT.xrdp (10.0 KB)

Also STRiPPED down to only 5 (makes more sense ins.Renoise) MODULS:

• ViBE , stereo vibrato
• SLAPi , short echo module
• AMBi , short reverb module
• ENSi , multi-voices chorus//flanger
• STERi , stereo manipulation

Posts: 1

Participants: 1

Read full topic

@joule wrote:

“Render Song to Disk”
“Render Plugin To Instrument”

Other than that, the GUI seems to be working great

Posts: 1

Participants: 1

Read full topic

@djnick wrote:

I really love Renoise Sample editor. In past few months I am using it daily for clearing vocals for videos, cartoons and composed songs and before I add compressor on whole sample track / song, I create all peaks to be nearly the same height.

To make “non-clickable” volumes, I enable “snap” icon and then select sample, part by part and each time I raise or lower volume by hitting “F10” key which will bring me “Adjust Volume” window where I either RAISE or LOWER sample selection for + or - 0,500 or 1 dB.

I’ve also configured CTRL + SPACE to “Silence Selection” (much faster than previously: hit F10, set volume to -INF dB and hit enter for process)

I have question:

1 - Is there easier way to adjust volume for default 1 dB without need to hit and oper F10 window? It would be fantastic if there will be buttons to + or - sample selection directly in Sample editor. Maybe it would be possible to create (and add short-cut key) macro or script that would speed up working with samples a lot?

2 - I have one more question: when I zoom sample (with middle mouse button wheel), would it be possible to set “middle mouse button” key to act as “hand tool” (or “Alt” + “Middle Mouse Button” for scrolling zoomed sample left/right? The only way (that I know) is - zoom sample and watch it left/right by holding “LEFT ALT” and “mouse wheel”?

3 - Is there possibility to enable helping “guide lines” in background of the Sample instead pure black background, as seen, for example, in old WaveLab software. Those guide lines are 50% below and 50% above sample’s central line (which represents “0” / Zero. Above is +100%, below is -100%. Guide lines are on 50% and would help a lot for clearing and fixing samples volumes - matching guide lines height, for example.

4 - And finally - Are there possibility to open “Modulation” tab OVER “Waveform” tab so we can easily make for example - volumes on samples (that would be non-destructive), as seen in WaveLab or Adobe Premiere (where you can see wave below video in time-line where you can add volume, reverb, compressor and many other basic effects)? If yes - how?

Modulation tab is not very useful as you work on “what you hear” instead - “what you see” (as expected), for more precise work. I guess - there is some “hidden” button to show sample in the background of “Modulation” tab

Cheers!

Posts: 1

Participants: 1

Read full topic

@svenfux wrote:

Hi!

I’m having a bit of trouble getting the Arturia CMI V VST to work with Renoise.
it USED to work, but I suddenly got an error-message when trying to load it.

The Renoise log tells me the following:

VstPlugs: Trying to instantiate C:\Program Files\VstPlugins\CMI V.dll
VstPlugs: Instantiate FAILED (caught structured exception) !!!

Audio Plugins: Failed to open plug VST: CMI V

Exception: Failed to initialize the plugin ‘VST: Arturia: CMI V’.

Error Message: Failed to initialize the plugin ‘VST: Arturia: CMI V’

• I uninstalled the plugin through Arturia’s Software Center and did a fresh install (The version that is installed now is a newer version that the one I had installed previously).
• I reopened Renoise and Rescanned previously failed plugins, but now it disappeared from the list of Plugins.
• I double checked that the DLL was indeed in the installed location (the location that is scanned by Renoise).
• I renamed CachedFailedVSTs_x64.db and CachedVSTs_x64.db and they were rebuilt, but the VST is still missing from the list after restarting (and rescanning) Renoise.
• I tried, as a test, to load the VST throught Ableton Live 9 and it works perfectly fine. It also works to run it as a standalone.

The weird thing is that it’s only this VST that doesn’t load. All the other Arturia V collection VST’s load without any issues.

I’m using Renoise 3.1 64bit with Windows 10.
The VST is question is also 64bit (32bit version does not exist).

Has anyone else experienced this issue?

Posts: 1

Participants: 1

Read full topic

@ostrogoth wrote:

is it possible to merge to xrns beetween us ?

ju

thank’s in advance for yours answers

Posts: 1

Participants: 1

Read full topic

@EETTEE wrote:

I always see this mentioned in forum posts, but I’ve never really understood it. The only non native mix/mastering plugins I use and Neutron and Ozone Elements from iZotope and when I started using Renoise my mixes were no better or worse than my Logic mixes.

Does it have any specific mixing weaknesses?

Posts: 1

Participants: 1

Read full topic

@uihewfkhwefn wrote:

I recently wrote a simple Guru synth definition for the Korg Volca Beats and thought it may be of use to someone else out there. Enjoy!

-- Part Levels local group_level = Group { name = "Part Levels", Parameter { id = "level_kick", name = "Kick Level", number = 60, default_value = 80, sysex_message_template = {0xB9, 0x28, "vv"} }, Parameter { id = "level_snare", name = "Snare Level", number = 41, default_value = 80, sysex_message_template = {0xB9, 0x29, "vv"} }, Parameter { id = "level_lo_tom", name = "Lo Tom Level", number = 42, default_value = 80, sysex_message_template = {0xB9, 0x2A, "vv"} }, Parameter { id = "level_hi_tom", name = "Hi Tom Level", number = 43, default_value = 80, sysex_message_template = {0xB9, 0x2B, "vv"} }, Parameter { id = "level_cl_hat", name = "Cl Hat Level", number = 44, default_value = 80, sysex_message_template = {0xB9, 0x2C, "vv"} }, Parameter { id = "level_op_hat", name = "Op Hat Level", number = 45, default_value = 80, sysex_message_template = {0xB9, 0x2D, "vv"} }, Parameter { id = "level_clap", name = "Clap Level", number = 46, default_value = 80, sysex_message_template = {0xB9, 0x2E, "vv"} }, Parameter { id = "level_claves", name = "Claves Level", number = 47, default_value = 80, sysex_message_template = {0xB9, 0x2F, "vv"} }, Parameter { id = "level_agogo", name = "Agogo Level", number = 48, default_value = 80, sysex_message_template = {0xB9, 0x30, "vv"} }, Parameter { id = "level_crash", name = "Crash Level", number = 49, default_value = 80, sysex_message_template = {0xB9, 0x31, "vv"} } } -- PCM Speeds local group_speed = Group { name = "PCM Speeds", Parameter { id = "speed_clap", name = "Clap Speed", number = 50, default_value = 80, sysex_message_template = {0xB9, 0x32, "vv"} }, Parameter { id = "speed_claves", name = "Claves Speed", number = 51, default_value = 80, sysex_message_template = {0xB9, 0x33, "vv"} }, Parameter { id = "speed_agogo", name = "Agogo Speed", number = 52, default_value = 80, sysex_message_template = {0xB9, 0x34, "vv"} }, Parameter { id = "speed_crash", name = "Crash Speed", number = 53, default_value = 80, sysex_message_template = {0xB9, 0x35, "vv"} } } -- Global Effects local group_global_fx = Group { name = "Global Effects", Parameter { id = "global_stutter_time", name = "Stutter Time", number = 54, default_value = 0, sysex_message_template = {0xB9, 0x36, "vv"} }, Parameter { id = "global_stutter_depth", name = "Stutter Depth", number = 55, default_value = 0, sysex_message_template = {0xB9, 0x37, "vv"} } } -- Part Effects local group_part_fx = Group { name = "Part Effects", Parameter { id = "part_tom_decay", name = "Tom Decay", number = 56, default_value = 80, sysex_message_template = {0xB9, 0x38, "vv"} }, Parameter { id = "part_cl_hat_decay", name = "Cl Hat Decay", number = 57, default_value = 80, sysex_message_template = {0xB9, 0x39, "vv"} }, Parameter { id = "part_op_hat_decay", name = "Op Hat Decay", number = 58, default_value = 80, sysex_message_template = {0xB9, 0x3A, "vv"} }, Parameter { id = "part_hat_grain", name = "Hat Grain", number = 59, default_value = 80, sysex_message_template = {0xB9, 0x3B, "vv"} } } -- Synth definition return SynthDefinition { id = "korg_volca_beats", name = "Korg Volca Beats", author = "Nick Hladek [nickhladek@gmail.com]", beta = true, content_height = 300, Section { group_level, group_speed, group_global_fx, group_part_fx } }

Posts: 1

Participants: 1

Read full topic

@Denn1593 wrote:

A new track ive made. Please give it a listen

Posts: 1

Participants: 1

Read full topic

@The_Otter_Years wrote:

Hi,

I’m using Renoise to send out clock to my modular. I’m using an audio interface with 8 outputs. When I render my song, the outputs sending clock are getting rendered along with my master channel. I thought they would be treated as separate and not included. Am I doing something wrong?

Thanks

Posts: 1

Participants: 1

Read full topic

@milkyheart wrote:

here you can see how i make my beats!

Posts: 1

Participants: 1

Read full topic

@joule wrote:

A small request about a detail: When entering multiple lines into column or track names, the GUI object seem to render the text vertically centered, meaning that the middle line is shown (if uneven amount of numbers) or two half lines are shown (if even amount of lines).

It would be nice if the top line was always rendered, making it possible to decide what is being presented to the user when the multiline “feature” is being exploited.

Posts: 1

Participants: 1

Read full topic

@Dry_Eyes wrote:

I want to post a little about controlling what part of the song the audience should focus on. Now, of course, you could say that control is bad. We don’t need control. Down with the controllers. BUT, when you want to lead the audience from one part of a song to another in a way that’s cohesive and doesn’t just sound like a mish-mash of sound, there are tricks.

I have to admit to using one that I’m putting up for consideration. Basically, you selectively drown out other tracks with whatever you’re trying to put the focus on.

Yes, you drown out the sound. It turns the background tracks into kind of an ambient wash. This is actually exclusively how I compose. Some tracks come in, and they sort of drown out other tracks. I don’t low-pass anything or hi-pass or bandpass anything, I just make sure what comes in sounds good and holds the attention, and let it drown out what’s not supposed to hold the atttention. Then when I silence certain tracks it causes other tracks to stand out, and so on.

I know that this could be considered a cheap trick, amateurish, but dammit I come from a DIY background originally and cheap production is the name of the game in genres influenced by that ethos. Not so much in electronic music though…

ALTHOUGH, when I compose I do tend to keep different octaves separate, like I don’t practice “close” harmony, I tend to put the harmonizing note on another octave. So there is that…

What do other producers think of this technique/idea?

Posts: 1

Participants: 1

Read full topic

@djnick wrote:

Hello

I see only similar posts from 10 years ago, so I decided to ask question:

• I have latest Windows 10 Pro 64-bit (10.0, Build 17763) with:
• i7 (older processor, I think I’ve bought it 3 years ago, 6 cores,12 CPUs)
• 32 GB Ram
• VIDIA GeForce RTX 2080 (with 8GB)
• 4k system resolution
• SSD disks
• Focusrite Scarlett 6i6 usb connected sound-card (set all to 48 khz)
• Latest Renoise (3.1.1) x64 and x32 version and all latest drivers…

… and - weird problem (that never happened before, on Win7 for example) and it is - SLOW SONG LOADING. Whatever song size I try to load, I have to wait over 40 seconds to Renoise “initialise” and then I will see fast loading samples and VSTs (in less than a second).

The same is with x32 version (but a bit faster) so I guess: Windows? Drivers? Something else?

Renoise (still) works fantastic, but slow loading is a bit annoying.

Here are snapshots of loading the same song on Renoise x64 and below is Renoise x32 version (4 times faster but still slow if compare with Windows7 and last years of work):

SlowRenoiseLoading-x64.jpg

SlowRenoiseLoading-x32.jpg

In Renoise icons long time ago I put “Run As Administrator” (I forgot what problems I had and why I put it, to be honest).

Btw, in Renoise settings device type is “ASIO” and device is set to “Focusrite USB ASIO” with samplerate “48000”

When open “ASIO control panel” I can see 48khz and buffer set to 1024 and Multi CPUs is set to 12, Limite to stereo in/out and Dithering are set to ON, Automatic PDC is set to on and CPU overload is set to 90%, 500ms…

I rarely use MIDI (lazy, mostly compose music on keyboard) and have ReWire bought (but used it few times)…

In Device Type I can only select ASIO while Direct Sound does not work (fails to reinitialise “Focusrite USB audio”)…

Any ideas?

Thanks

Posts: 1

Participants: 1

Read full topic

@EETTEE wrote:

I haven’t actually worked with this setup yet (set it up a minute ago), but I don’t see the downsides.

I shifted all of the view functions over by 4 and they take up the rest of the function keys. Redo is now shift + F4. I might end up switching Undo and Redo (to “childproof” Undo) but I can’t tell which would be a worse misclick. Guess we’ll find out? Anybody else want to partake in this idiocy?

Posts: 1

Participants: 1

Read full topic

@ffx wrote:

Hi,

I am looking for a replacement VST for the Renoise Bus Compressor. I like this device very much and would die for a VST version of it, but you can’t have everything you want.

So far I tried fabfilter, mcomp, ozone dyn 1 band, tb… It never sounds the same, the Renoise bcomp nicely also captures even early transients, maybe the attack curve is bent or so. I now found a replacement for the standard compressor, but the bus compressor works differently. I also tried to bend the release curve, still not the same.

Any experience or tips here?

Posts: 1

Participants: 1

Read full topic

@actor wrote:

Finally, I finished my first song. I’m not sure if it’s any good though.

The plan was to speak a poem (it’s German but language doesn’t matter here) and to add some electronic music. Quite surprisingly, it sounds more like a rock song in some parts but anyway. Here you go:

What do you think?

Posts: 1

Participants: 1

Read full topic

@Raul wrote:

It seems that the forums do not have the ability to click on an image uploaded or copied directly into the message so that it can be seen in a floating window with the full / actual size of the image.

Is it possible that something is malfunctioning that causes images not to be correctly deciphered?

For example:

1. go to: New Tool (3.1.1): KangarooX120 v1.1 build 030
2. right click of the mouse in the image and
3. click in: open the image in a new tab.

The image will appear in a new window in full size… I think I saw the images appear in a black frame with the ability to zoom to see full size from the same tab.

Posts: 1

Participants: 1

Read full topic

@Raul wrote:

@taktik Would it be possible to directly share extensions of XML and ZIP files in the forums?

Drag and drop & upload file …

Posts: 1

Participants: 1

Read full topic