Forum

This sounds odd, but hear me out:
-Everytime I press a key for an instrument, I want to randomize the offset/phase of a soundwave
-Currently the solution to do this is create a non-repeating phrase that’s single line and uses maYbe commands.

-The problem with this approach is the instrument engine only allows 12 notes to be played.
-There’s no way to jump lines in phrases.

So if I was given power to achieve what I wanting to do, this is what has to happen:
-LPB needs to be 0
-Instrument allows each press to be random
-But most importantly you can use this phrase to achieve the goal I’m seeking

1 post - 1 participant

Read full topic

Hello everyone,

I am currently testing the Demo of Renoise and im absolutely loving it so far.

There is one specific issue I am dealing with so far though and couldn’t find much info about it in the manual and in the forum … Automation.
Coming from a Ableton and Fl-Studio Background im super used to being able to control parameters of 3rd party software as automation as example:

I create a typical Deadmau5 ish arp sound in Serum and assign the filter cutoff and decay time to my macro1. How do i automate that in the timeline like i do with dsp effects so i can open it up over time?

I found several forum entries talking about the instr. Automation add on but that one doesent nearly contain all parameters and is a pain to navigate.

Being used to just “learn” the macro controls in a daw the parameter im clicking its super confusing for me.

I also saw that in the plugin tab there are macro controls but they are greyed out. Is there a specific way to assign stuff to them?

Sorry if i just overread it in the manual but this is the only thing bugging me out so far.

Thanks you in advance and have a great day!

2 posts - 1 participant

Read full topic

I finally have sorted my problem out with waveshells and renoise,I’m sure there is people that might benefit from this in the forums here,so maybe this could be pinned as a potential solution for some people.

First, uninstall:

1. Launch Waves Central.
2. Go to the Settings page in the bottom left corner.
3. Under Maintenance, look for Uninstall and click the drop-down menu.
4. Checkmark all the available version entries and click Uninstall.
5. Quit Waves Central.
6. Go to C:\Program Files (x86) and delete the Waves folder.
7. Press [Win key]+R, type %AppData% and hit Enter.
8. In the Roaming folder that shows, drag the Waves Audio folder to your desktop.
9. Press [Win key]+R, type **%LocalAppData%**and hit Enter. In the window that shows, delete the Waves Audio folder.
10. Press [Win key]+R, type **%ProgramData%**and hit Enter. In the window that shows, delete the Waves Audio folder.
11. Delete any WaveShell files you find in the following locations (if exist):

• C:\Program Files\VSTPlugins
• C:\Program Files\Common Files\Avid\Audio\Plug-ins
• C:\Program Files\Common Files\VST3
• C:\Program Files (x86)\VSTPlugins
• C:\Program Files (x86)\Common Files\ DigiDesign\DAE\Plug-Ins
• C:\Program Files (x86)\Common Files\VST3
• C:\Program Files (x86)\Common Files\WPAPI

Now to re-install:

1. Download and install Central.
2. Run Central and log in.
3. Go to the Install Products page in the top left corner.
4. Under My Products, checkmark the products you wish to install.
5. Click Install on the bottom right.

Make sure to follow every step here exactly as stated.

Run plugins in sandboxes option must be enabled.*

This option is under renoise preferences,plug-ins,make sure to tick the box.

That’s it,all my plugins work fine now.No more crashes.Hope this helps someone out there because I know how frustrating waves can be.

1 post - 1 participant

Read full topic

Hi, I am not sure if this is offtopic or here,

But I have a question for you Renoise devs. How are the ReWire transport requests (play/stop/position) that are sent from Renoise synced to the mixer DAW? Is there a formula that compensates the time between issuing a pattern restart and the end of the RWDEFDriveAudio call? Or is the position just set to 0?

Much love,
Maxim

1 post - 1 participant

Read full topic

It’s like the remains of 3-4 different tracks which I scrapped and somehow they just worked together. Music is wierd like that.

I hope you like it, and merry christmas ya all!

1 post - 1 participant

Read full topic

I’ve done the obvious to begin with:
*Un- and reinstalled latest Renoise ver, tried some older ones too
*My prefered VST folder is D:\x128, but I’ve tried installing VST and Renoise in default C:\ location
*Deleted plugin caches in %AppData%

Having problems with Scaler VST from plugin boutique. Like the title says-- in the quick scan for plugins
scaler.dll is actually read in the bottom left corner but doesn’t appear in plugin tab. I have tab expanded, no hidden devices.
Other VSTs work without a hitch. Could it be that the plugin is MIDI-specific? Had it working for months before I can’t get it recognized anymore for the life of me.
I was surprised when I tried installing InstaChord which was less preferred and it too didn’t get put in plugins tab.

Am at wits end.

1 post - 1 participant

Read full topic

I have two sets of dials in my controlmap.xml that I want to map to parameters of the Effect application. I’ve tried all sorts of combinations, but I can’t get the syntax right

So my question is, how can I assign group_name twice for DialSet01 and DIalSet02? As you can see I’ve tried to separate two groups with a comma, but that doesn’t work.

1 post - 1 participant

Read full topic

Simple! Post one track you made in Renoise in this year of 2021!

Here’s mine - its the ONLY track I made this year ¯_(ツ)_/¯

midierror

4 posts - 2 participants

Read full topic

Hi, can anybody tell me how to achieve this kind of classic drum & bass/ jungle drums filter sweep / EQ sweep?

example at 2.22 sec of this video total science - method - YouTube

(Ideally I’d want to be able to program it with commands in the fx columns)

…Im currently playing with Envelope commands for Cut Off envelope in the sample modulation, with some Okay results but lacking the resonance so probably needs some Macros setup.

also I’m aware of the Sample smoothing method, of repeatedly duplicating and smoothing the sample. Filtered drum rolls, how it was made historically?

Thoughts?

1 post - 1 participant

Read full topic

0.0000000001 alpha version

https://drive.google.com/file/d/1eGmidx5oOc04wnULkmN-vbkBjVXFiA3p/view?usp=sharing

1 post - 1 participant

Read full topic

Two Kodiaks sequencing two Polymers in Bitwig

https://vimeo.com/655278077

Tele Bird

1 post - 1 participant

Read full topic

A Christmas inspired track for you all. Merry Christmas!!!
I am planning to add lyrics but this is what i have so far

1 post - 1 participant

Read full topic

I made Just Intonation Piano - using Lissajous Curves - because I can https://en.wikipedia.org/wiki/Lissajous_curve

I Panned root note to Left, then following semitones to the Right - and in the Renoise oscilloscope one can see the Curves/Figures.

I attempted to find the nearest fine-tuning match for a given semitone - so, that relating to root note C, it creates a stable curve in the oscilloscope. There is a bit of jittering because, I guess, of the limits for fine-tuning resolution available - 1/128.

Try playing C + E or C +G.

C Major sounds good imho.

If you want to play with other root note - change the Instrument Global Pitch semitones, e.g. C → D is 2 semitones up, etc etc.

SinPianoSimpleJustIntLisajoutFugures.xrni (133.0 KB)

1 post - 1 participant

Read full topic

Is it possible to clear the snapshots(a/b)?

I have a doofer (2 snaps) linked to a convolver (2 snaps)
Each convolver preset and snapshot containing a ir sample.
Now there are a total of 9 ir samples that are saved and therefore slowing down the save speed.

Thanks in advance

1 post - 1 participant

Read full topic

Nothing special here But maybe you like this

1 post - 1 participant

Read full topic

Greetings all;

I’m new to the forums, and I just did a search for this topic. I found a thread about Renoise projects being self-contained, but this is specific to Redux.
I would love to have the option for the Redux VST to simply load the .xrni from disk, instead of saving all of that in the plugin state.

I’m using Redux as a VST with Reaper, mostly for percussion samples. The ease of setup, flexibility and multiple outs are perfect! But where a Reaper project file is a few hundred KB in size, adding a Redux percussion section can add 1 to 4 MB to the file size. One of my percussion instruments is 3.9 MB. If I have 5 songs, each with 5 versions, that use that library, that’s 100 MB of redundant files.

When I record audio into Reaper, there is only 1 copy of that audio, no matter how many versions of the song I do. I can chop up the audio, copy and paste sections, and it uses the original audio files.

A lot of people like Redux/Renoise for the tacking. I bought it to use as a VST sampler. Lots of outputs, separate FX busses, and an relatively easy to understand interface to configure it all, makes Redux a great VST sampler. I just wish it didn’t save copies of my instruments in the Reaper project files.

Thanks for making such great software!

1 post - 1 participant

Read full topic

Hi,

I own a keyboard which is programmed to natively output colemak-dh keycodes, which is fine for all of the keyboard shortcuts I can re-define in the settings. But the virtual keyboard is hardcoded for compatibility reasons (ironically the compatibility reasons is what is causing my troubles) which has been mentioned here: How to reassign keys used to enter notes - #3 by Abe_Froman. I’ve even looked into modifying the binary since it’s such a niche problem but I couldn’t figure it out.

At the moment I have a workaround where I have a qwerty mode on my keyboard which I can access but it’s a pain remembering to switch between them with a shortcut. Does anybody know of any better ideas to get the virtual keyboard working as expected rather than having pitches randomly scattered about the keyboard?

Thanks,
Aaron.

1 post - 1 participant

Read full topic

How do i route the output coming from my TD3 to Renoise and add some (realtime) effects like distortion and delay to the midi-track in Renoise? I have added some effects by dragging them to the track but they are not processed; i keep hearing the original output from the TD3.

What am i missing here?

2 posts - 2 participants

Read full topic

Hi,

I have an Akai APC40 hooked up to GridPie. My Akai grid can output yellow, red and green. The grid buttons on the Akai light up yellow if a corresponding track is active. But all the other grid buttons stay black, so the inactive, but also the inactive with content. Now I don’t know what button to push on the next pattern, it could be empty, or not, I can’t tell the difference by the color.

I’d rather have something like all my tracks with content are red and the ones playing green. That way I know that the black buttons are empty.

Does your GridPie also output only one color? Can somebody help me to fix this?

Thanks!

2 posts - 1 participant

Read full topic

Hey, just updated my mac to Monterey and Renoise no longer loads.

It comes up with the loading screen and gets stuck on “Loading song ‘TemplateSong.xrns’…”

I can’t be the only one to have this problem, assume it’s just to do with the OS update. Stupidly didn’t back up my hard drive before so can’t go back, hoping this will be fixed in a future Renoise update…? Or anything I can do now to make it load?

Thanks…!

1 post - 1 participant

Read full topic