Renoise Forum

@KnownUn wrote:

Whats up! Feelin’ the friday?

Whats you plans?

I’m trying to setup the best possible way to have the Digitakt conquer VCV Rack, first attempt:

PEACE!

Posts: 1

Participants: 1

Read full topic

@longhorn wrote:

Highlighted Block

Hi, does anyone know if it is possible to just mute a specific block of lines like in the image, I dont wan’t to cut it cos I might want to use that part at a later time.

PS: I have another question if anyone happens to know: In Sampler>Waveform>Interpolate option, Interpolate is turned off by default. What is the difference between this and enabling it but selecting ‘None’

Thanks!

Posts: 1

Participants: 1

Read full topic

@Sparky wrote:

Hi. I’m writing some code to convert my module format into XRNS. Does Renoise have a debug log that can be enabled at all?

Renoise is crashing when trying to load my XRNS file. It works fine when I produce a dummy/new tune XRNS. I’ve been doing a number of comparisons trying to make my file identical to what Renoise would (my file has different patterns and notes at the moment).

Just wondering if there’s anything I can look at or enable to help me work out what the offending XML element is?

Here’s a example of XRNS file I’m trying to load.
TestWrite.xrns (4.1 KB)

Posts: 1

Participants: 1

Read full topic

@Keisuke wrote:

Which of the following is the Renoise plugin standard?
VST, AudioUnits, AAX,
Please tell me.

Posts: 3

Participants: 2

Read full topic

@taktik wrote:

⮚ Renoise 3.2.1 & Redux 1.1.1 betas released

Another little bug (R3.2.1 b1, W10):

Remember also that there is a small bug in the operation of the “Flip button” in the Automation Editor. In case you want to solve it for this new version:

The problem: when flip (horizontal), it should also appear curved. The point that defines the curve is lost.

Splitting this out of ⮚ Renoise 3.2.1 & Redux 1.1.1 betas released so it doesn’t get lost…

Posts: 1

Participants: 1

Read full topic

@babaakbaralikhanji12 wrote:

+91-9116334052 {Nagpur} Online Vashikaran solution Baba Ji +91-9116334052 {Nagpur} Online Vashikaran solution Baba Ji +91-9116334052 {Nagpur} Online Vashikaran solution Baba Ji +91-9116334052 {Nagpur} Online Vashikaran solution Baba Ji

Posts: 1

Participants: 1

Read full topic

@babaakbaralikhanji12 wrote:

+91-9116334052 {Bhopal} Love Back solution Specialist Baba Ji +91-9116334052 {Bhopal} Love Back solution Specialist Baba Ji +91-9116334052 {Bhopal} Love Back solution Specialist Baba Ji +91-9116334052 {Bhopal} Love Back solution Specialist Baba Ji

Posts: 1

Participants: 1

Read full topic

@babaakbaralikhanji12 wrote:

+91-9116334052 {Jaipur} Divorce Problem Solution Baba Ji +91-9116334052 {Jaipur} Divorce Problem Solution Baba Ji +91-9116334052 {Jaipur} Divorce Problem Solution Baba Ji +91-9116334052 {Jaipur} Divorce Problem Solution Baba Ji

Posts: 1

Participants: 1

Read full topic

@Jengamon wrote:

I need a way to allow Renoise to continue with its life while I do a bit of calculations. Is it possible to do this? Another alternative is a blocking dialog, where I can do calculations on another thread while the main application does the GUI-fu.

Really, I want to run anything registered to “renoise.tool().app_idle_observable”, so is there a way to say that even though I’m in a while loop waiting, the app should be idle?

Posts: 1

Participants: 1

Read full topic

@niNja_pWn wrote:

Check out the link. This is a course available to music studies at this uni. but included in this is a bit of renoise?!! YOU BET!!

Posts: 2

Participants: 1

Read full topic

@EatMe wrote:

Hi… I don’t know exactly how to reproduce this bug but this is what happened:

the Menu File… Open recently saved… is not updated.

Open Renoise (1)
Open Renoise (2)
Save Song in Renoise (1)
Close Renoise (1)
Close Renoise (2)
new day: Open Renoise ( y )
The recently saved files list is not updated, maybe because Renoise 2 is not aware of Renoise 1? I have a song version 3 that is (obviously) saved, but not appearant in the Renoise saved list.

kbai.

Posts: 1

Participants: 1

Read full topic

@D.A.T wrote:

hey, just downloaded redux and now i wanted to record my first sample but i couldn’t figure out how to get the audioinput channel into redux, i use it as instrument plugin in cubase 10. sadly this topic isn’t documented anywhere. Anyone knows how to feed it with the reqired audiosignal.

Posts: 2

Participants: 2

Read full topic

@YuugenP wrote:

Hello. I have been using Renoise for quite some time, and I have noticed that there is something unusual about my version of the program. Every time I close Renoise (or it crashes) and opens it again, my key assignments were all reset.

Any ideas on how this can be fixed are greatly appreciated. Thank you!

Steps to reproduce:

1. Open Renoise (Currently using the 3.2.0 release)
2. The preferences are reset.
3. Now change any of the keymaps (e.g. “Note Off” to “A”). Close the prefs tab.
4. Close Renoise and run the program again

Expected result:

• The key bindings stay the same as it is before the program was closed.

Actual results:

• The binding got reset.

Posts: 1

Participants: 1

Read full topic

@brainslayer wrote:

VSTI’s like recent Arturia Plugins do have a own gui resize feature. with the latest 3.2.0 (and 3.2.1 beta) this doesnt work anymore, but was working with 3.1.0 the mouse events are captured at correct scaled destination but the gui of the plugin itself is 4 times smaller. this might be related to the windows own gui scaling feature since this screenshit was made on a 4K screen. the only way to work around this issue is using compatibility setting and changing high dpi settings to “system extended”

Posts: 1

Participants: 1

Read full topic

@thebinarycollective wrote:

So, I have been messing a bit with NRPN which gives you 14 bit depth automation capability using two MIDI CCs.

So I have CC 6 and CC 38 (which corresponds to NRPN 1) to get my 14 bits, ie 0x3FFF‬ is the max possible or 16383.

BUT when I record this into the pattern editor both values don’t get recorded. Only the one. So even then if I’m using two knobs or sliders with a controller it doesn’t record into poly fx columns. It will do so within the automation editor, but the arrays governing automation should be the same design as the regular old hex columns.

So neither a feature request or a bug really, more like boneheaded design that drifts more along the “bug” side as that kind of thing should be standard specification.

Why is this important (and why Renoise should simply have 16 bit depth within the fx column anyway) is that you can do near audio rate level control data and you don’t have to make use of trying to slew/interpolate from 8 bit to the 32 bit mixing/plugin/OSC/whatever that is more modern. Even this crappy 10 year old BCR2000 will do 14 bit absolute value. (and that’s what I’m using)

To illustrate:

Posts: 1

Participants: 1

Read full topic

@rockfistus wrote:

I noticed a lot of ReFX plugins are just straight up not available anymore. I use PlasticZ still and it’s literally the ultimate synth bass plugin, I couldn’t imagine my Renoise life without it. I liked a lot of their plugins actually but I’m backing up my copies of PlasticZ for sure!

Posts: 2

Participants: 2

Read full topic

@keybreak wrote:

@taktik
Linux, Renoise 3.2.1 b1 (seems 3.2.0 also)

Automation - Process all create functions last point is not present, here’s sine demo:
https://i.imgur.com/a1lobJP.mp4

inxi -Fxxz of test machine, if it matters:

System: Host: x133-pc Kernel: 5.2.21-1-MANJARO x86_64 bits: 64 compiler: gcc v: 9.2.0 Desktop: Deepin 15.11 tk: Qt 5.13.1 wm: DeepinWM dm: LightDM Distro: Manjaro Linux Machine: Type: Desktop System: Gigabyte product: Z87X-OC v: N/A serial: <filter> Chassis: type: 3 serial: <filter> Mobo: Gigabyte model: Z87X-OC-CF serial: <filter> UEFI: American Megatrends v: X08 date: 11/15/2013 CPU: Topology: Quad Core model: Intel Core i7-4770K bits: 64 type: MT MCP arch: Haswell rev: 3 L2 cache: 8192 KiB flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 56020 Speed: 3500 MHz min/max: 800/3500 MHz Core speeds (MHz): 1: 3500 2: 3500 3: 3500 4: 3500 5: 3500 6: 3500 7: 3500 8: 3501 Graphics: Device-1: NVIDIA GM200 [GeForce GTX TITAN X] vendor: eVga.com. driver: nvidia v: 435.21 bus ID: 01:00.0 chip ID: 10de:17c2 Display: x11 server: X.Org 1.20.5 driver: nvidia resolution: 2560x1600~60Hz OpenGL: renderer: GeForce GTX TITAN X/PCIe/SSE2 v: 4.6.0 NVIDIA 435.21 direct render: Yes Audio: Device-1: NVIDIA GM200 High Definition Audio vendor: eVga.com. driver: snd_hda_intel v: kernel bus ID: 01:00.1 chip ID: 10de:0fb0 Device-2: Standard Microsystems type: USB driver: snd-usb-audio bus ID: 2-9.1:4 chip ID: 0424:3fb9 Device-3: Evolution UC-33e MIDI Controller type: USB driver: snd-usb-audio bus ID: 2-10.1:5 chip ID: 0a4d:00f5 Sound Server: ALSA v: k5.2.21-1-MANJARO Network: Device-1: Intel Ethernet I217-V vendor: Gigabyte driver: e1000e v: 3.2.6-k port: f040 bus ID: 00:19.0 chip ID: 8086:153b IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter> Drives: Local Storage: total: 11.61 TiB used: 5.01 TiB (43.1%) ID-1: /dev/sda vendor: Samsung model: SSD 850 PRO 512GB size: 476.94 GiB speed: 6.0 Gb/s serial: <filter> ID-2: /dev/sdb vendor: Western Digital model: WD40PURZ-85TTDY0 size: 3.64 TiB speed: 6.0 Gb/s serial: <filter> ID-3: /dev/sdc vendor: Western Digital model: WD40PURZ-85TTDY0 size: 3.64 TiB speed: 6.0 Gb/s serial: <filter> ID-4: /dev/sdd vendor: Western Digital model: WD40PURZ-85TTDY0 size: 3.64 TiB speed: 6.0 Gb/s serial: <filter> ID-5: /dev/sde vendor: Samsung model: SSD 850 EVO 250GB size: 232.89 GiB speed: 6.0 Gb/s serial: <filter> Partition: ID-1: / size: 468.20 GiB used: 64.84 GiB (13.8%) fs: ext4 dev: /dev/sda2 Sensors: System Temperatures: cpu: 51.0 C mobo: N/A gpu: nvidia temp: 66 C Fan Speeds (RPM): N/A gpu: nvidia fan: 25% Info: Processes: 242 Uptime: 16h 48m Memory: 31.36 GiB used: 7.18 GiB (22.9%) Init: systemd v: 242 Compilers: gcc: 9.2.0 Shell: bash v: 5.0.11 running in: deepin-terminal inxi: 3.0.36

Posts: 1

Participants: 1

Read full topic

@toimp wrote:

When you dragging these points to the bottom, it sometimes “jumps” up abit:

Renoise 3.2, Windows 10

Posts: 1

Participants: 1

Read full topic

@stoiximan wrote:

I hope you join the competition.Here is my entry

Posts: 1

Participants: 1

Read full topic

@beublo wrote:

I get a std::logic_error: 'invalid edit pos. valid values -> (1 - song_end)' when I try to set the position programmatically.
Initially I was using the _beats variant and thought it may be due to some rounding error, but even when settings sequence/line directly, this error occurs.
To reproduce, create a new song and enter in the terminal renoise.song().transport.edit_pos = renoise.SongPos(1, 64).

Posts: 3

Participants: 2

Read full topic