Forum

Hi !

This is an Electro Rock Vintage track in collaboration

few informations :
135 bpm, only vst & rompler & midi (1 sample for solo guitar).

• SpireVST (bass)

• Predator VST (arpeggio like chemical brothers in second intro)

• SynthMasterOne (arpeggio electro)

• OperaVoice (voice intro and final)

• ProDrummer (all battery and midi partition)

• EastWest virtual guitar Carvin (first guitar for chorus)

• Dune 3 (big synth chord)

• Nord Lead 1 (synthetic bass)

• Solo guitar : David Perez

Good listening !

edit : it’s my track for Revision 2021 DemoParty

1 post - 1 participant

Read full topic

1 post - 1 participant

Read full topic

New Duplex configuration for the Keylab MKII:

All lights works with differents color and react to Renoise change and Keylab change.
All parameters name, instruments name, track name display on screen and react to Renoise change and Keylab change.

Due to the use of lights for PADs (not the default one that are semi lighted) and some bugs in USER mode with lights, i had to use the standard midi port hence the Analog Lab mode don’t work anymore but you can use Instrument Automation device with the preset in the package to have the parameters name on screen (Part 1 and 2 only).
Lights works as usual in Analog Lab.

Some mode change (DAW/Analog Lab/USER) need a press on the “Out” button to recall all the lights, i can’t check which mode are choose in certain order so i had to use a button.

DAW Commands work the same in all modes.
The arrow on transport buttons select previous/next pattern.

In the package, there’s the default Renoise midi file, all Keylab presets, nearly all VSTi default midi map i was able to save (you need to load them as default in the VSTi).
The corresponding pad to trigger to enter in the correct preset for the instrument selected is hilighted everytime you change instrument. Trigger it will enter USER mode with the corresponding preset.

Please let me know if you have some ideas or encounter bugs… it was tested since one month without any issues but i probably have missed some.

Due to the autorized extensions, i had to upload the package elsewhere:

5 files sent via WeTransfer, the simplest way to send your files around the world

Thanks!

1 post - 1 participant

Read full topic

Hi, just picked up a lovely Behringer CAT today and had lots fun with it already. It is characterful and going to be fun to use and sample!

I’m trying to get it all set up nice for use in Renoise and I’ve spotted an issue.

The CAT appears to be operate in auto-legato mode with no triggering of envelopes when a note comes in without a note-off first. I can add explicit note-offs in the track to get “normal” behaviour, though this could get rather messy. Is there a way I can have Renoise send them automatically? A specific retrigger mode or something.

I haven’t found anything about this on the CAT side yet, but I’ll keep looking, maybe I can switch the synth behaviour.

Cheers.

5 posts - 2 participants

Read full topic

Description:

I am working on developing a VST3 plugin on Windows 10 using the JUCE framework. Everything is 64 bit. The default plugin template project’s VST3 output fails to load in Renoise 3.3.2 when placed inside of C:\Program Files\Common Files\VST3. My plugin also fails to load (which is why I’ve tested the basic JUCE template as well).

The plugins load successfully in all other DAWs I was able to test with:

• JUCE’s AudioPluginHost
• Ableton 10
• Reaper 6.19
• Tracktion Waveform 11.5

Steps to reproduce:

1. Using JUCE’s Projucer create a new Project and choose Plugin → Basic
2. Configure desired names, etc., but otherwise use default project values
3. Open project and build in either Debug or Release mode
4. Copy the binary .vst3 file to C:\Program Files\Common Files\VST3
5. Open Renoise and ensure VST3 plugins are enabled; rescan as necessary

Expected results:
Plugin should appear in Renoise’s VST3 plugin list.

Actual results:
Plugin fails to load.

Extras:
I looked at the log file and this seemed to be the relevant failure information during instantiation of the plugin:

It says ‘not critical’ and then releases the plugin according to the log file. What is the controller state requirement Renoise is looking for to allow instantiation and consider the plugin valid?

Final thoughts:

So far, statistically speaking, the majority of other DAWs don’t seem to impose whatever this requirement is on a plugin before allowing it to load. This is an undesirable experience as a plugin developer, at least not knowing yet why such a basic plugin build should fail to load.

Thanks for any attention or help with this.

1 post - 1 participant

Read full topic

I use old synth hardware over a MPU-401 AT interface on a windows98SE system.
The Sample option on renoise is great, but at the mom i use the Creative wave sampler to create WAV samples for Renoise. I was thinking about get a AKAI MPC to create samples with more depth and options to edit it.
First focus was a MPC-2000XL but than i switched to a MPC-1000 because the usb data transfer. At the moment i fall in love with the Live 2. Because its standalone.
What you guys can suggest ? Not buyed any MPC at the mom will be the first hardware sampler. (dont have the money for a mpc 60 or 3000 ^^)

1 post - 1 participant

Read full topic

A flexible universal ASIO driver that uses the PortAudio sound I/O library. Supports WASAPI (shared and exclusive), KS, DirectSound and MME.

here’s the GUI version too, since the original doesn’t have it.
dechamps handles the driver itself, and flipswitchingmonkey made a GUI for us to use.

Simple configuration GUI for FlexASIO. Contribute to flipswitchingmonkey/FlexASIO_GUI development by creating an account on GitHub.

so just FYI, you install the gui version first then update the driver, with dechamps most recent version.

2 posts - 2 participants

Read full topic

New track out! On my new album available on Bandcamp.
Tell me what you think.

3 posts - 2 participants

Read full topic

A fun experiment with a Xun, a chinese flute, and a bunch of loops which turns out far better than expected.

1 post - 1 participant

Read full topic

Download

This is a tiny bugfix update only. See below for the changes.

• Registered users can download the update at the Renoise Backstage
• Demo versions are available at the Renoise Download page.

What’s new

Renoise:

• fixed: some VST2 plugins could show up in Renoise with a mono input and an additional side-chain input, although they are stereo (see Excalibur VST2 is mono in Renoise 3.3 & keyboard assignment issues)
• fixed: Linux: non embedded VST3 plugins did not receive size updates correctly - fixes problems with some VST3s in yabridge (see GitHub - robbert-vdh/yabridge: A modern and transparent way to use Windows VST2 and VST3 plugins on Linux)
• fixed: some VST3 plugins may have received wrong binary values (fixes preset restoring problems in some yet to be released grimoire DSP plugins)

Redux:

• fixed: Linux: avoid handling/listening to SIGHUP signals. fixes possible crashes when running Redux in Radium (see [NSM] Radium crashes at the end of closing a session · Issue #1329 · kmatheussen/radium · GitHub)

1 post - 1 participant

Read full topic

When I made change in ASIO4ALL control panel,there is no changes in renoise
Always set to 512 samples

1 post - 1 participant

Read full topic

Hello, I’m new to Renoise, sort of… I remember messing with Trackers in the late 1990s, probably even Renoise if it was around then… But I couldn’t get my head around the way they worked, and I had Cubase at that time, and didn’t see any reason to really dig deep into learning how to use Trackers… Looking back, I really wish I did now! Think my music might have gone in different directions over the years if I had got started with Trackers a long time ago. Oh well, I guess that time is now.

So I haven’t paid for Renoise, yet, but I’m seriously considering it…

So, my question…

Do Trackers sound crunchy to you? I can’t quite explain, but to my ears Renoise, and other Trackers sound tighter and cleaner than regular DAWs? Is this a real thing, or maybe its just the type of music people tend to make on them?
I saw a video on Youtube with another Tracker user, and he described it as crunchy.

What do you think?

2 posts - 2 participants

Read full topic

A simple device idea
It work in 3 modes

1 post - 1 participant

Read full topic

Trying to use the M-Audio included ASIO driver and it gives me this error. (M-Audio M-Track Duo Interface)

ASIO: Initializing
ASIO: Trying to open ‘M-Audio M-Track Solo and Duo ASIO’
ASIO: LoadAsioDriver … FAILED
Error Message: Failed to initialize the ASIO driver. Please make sure that the device is properly connected and that the driver is not used by another application.
ASIO: Init FAILED! DriverError :
Error Message: ASIO failed to open. Trying to open DirectSound instead…

Things i tried so far:

• Installed newest version drivers from M-Audio
• Check that msconfig → startup → All else stopped from starting but firewall
• M-Audio Asio driver works in Sound Forge but closing it and trying Renoise fails.
• Asio4All works (But cannot use this to watch video at same time i’m composing to).
• FlexAsio (Pretty much the same)
• Disabled allow application to take exclusive control of this device
• Closing most stuff from task manager by hand

Version : Renoise V3.3.1 (Jan 11 2021)
Date : 2021-03-23
Time : 23:23:12
OS : Windows 7 Service Pack 1 (x86_64)

Any tips or things to try how to get M-Audio included Asio driver to work would be appreciated.

3 posts - 2 participants

Read full topic

order pure #ketamine# 3mmc# #mdma##etizolam# skype: kerrychemltd wickr: kerrychemltd

1 post - 1 participant

Read full topic

Renoise & Nexus 3.

1 post - 1 participant

Read full topic

Well, my first attempt at actually putting together an project ever slightly more complex file than a couple of patterns with 3 tracks simply won’t load. It just beachballs at 100% CPU and never completes, I’ve given it 15 minutes to think about it. I have a couple of EW Play and Kontakt instruments in there (I was planning on sampling later on), seems likely they’re the culprits.

How do I get this loaded? Is there a safe mode where I can stub ithe instruments until I figure out what’s bust?

HALP!

(Things were going swimmingly in the initial session!)

2 posts - 1 participant

Read full topic

Hi there,

i found this programm from a youtube video of Hoffman.
Im into Protracker on the amiga and also want to use real midi synths over a MPU-401AT on my Win98SE system. Is it possible to download the V1.5 (latest for win98) when i buy a actual license?

regards
Chris

1 post - 1 participant

Read full topic

I use Tracktion 7 as master and Renoise as slave

If I render to a file at 32 bit 176.4Khz with tracktion,will Renoise use the same parameters?

1 post - 1 participant

Read full topic

Renoise & Nexus 3.

1 post - 1 participant

Read full topic