Renoise Forum

I’m punching in notes with a drum pad controller and I keep fat fingering an extra pad and adding an unintended additional note/column. Is there a way to disable this behaviour?

1 post - 1 participant

Read full topic

Is there a way of the command “B00” not play the whole sample in reverse but a slice that I put in the Pattern Editor?

More specifically, if, for example, C404 is the 8th slice in total of 12 slices of a sample, when I put B00 in FX column, it plays the whole sample in reverse. Any ways of playing that slice specifically in reverse?

7 posts - 2 participants

Read full topic

So I’ve managed to get a linux setup with yabridge doing a reaonably good job of letting me open my old windows projects. I’ve only wrapped a few VSTs to avoid overdoing things, and one thing I’m trying to figure out is whether there is a way to associate a native linux VST with the VST that was used in the windows project.

Specifically, I’ve installed (native linux) pianoteq, and when I open a project I get the “VST not found” message for the windows version of pianoteq. I tried installing the windows VST, but no luck, it just crashes. Of course I can replace the instrument, but that will destroy the preset settings, and break the project on windows. Not a big problem for pianoteq, but I can see this being an issue as I continue.

Anyone know of a solution for this? Is there a way to spoof a linux-to-linux bridged plugin?

1 post - 1 participant

Read full topic

So, looking deeper into FM/PM/PD/AM, one can get VERY close to all sorts of these 2-OP FM sounds with just the Distortion module. They are basically altering the waveform’s shape. Using a basic sine-wave, run it through this Doofer.

What makes it useful for synthesis is the amount of limitation used in the Doofer. The distortion module is very heavy-handed to use on its own, without limiting the amount of distortion used. Taking the Doofer and controlling how much distortion can happen now makes the distortion models useful for melodic work, instead of just distorted fart sounds. With the other knobs, one can select the model of distortion, the tone, and the amount applied.

I imagine this could also have control via LFO one-shot to create envelopes? What do y’all say? Maybe we could make another Doofer with this that controls the envelope?

Pseudo FM Init.xrdp (3.3 KB)

1 post - 1 participant

Read full topic

Hey Renoisers,
Woah, it’s been a while! I’m back to say that GPU Audio (who I work for) have just launched an IR Creation Competiton. We’re offering over $6,000 of prizes supported by AMD, NVIDIA, Sonible, MusicByLukas, PresentDayProduction, and Bedroom Producer Blog.

All the details are here: https://www.gpu.audio/IRCreationComp

Making an IR is really simple, and there are some free tools you’ll find for Windows and Mac listed on the Competition page! There are 3 steps to enter the competition:

• Register an account on https://gpu.audio

• Create an IR using hardware, software or acoustic spaces and upload your IR processing the sounds from the Asset Pack to YouTube with the hashtag #GPUAudioIR

• Send your IR, a description of how it was made and your YouTube video link to ircompetition@braingines.com

The competition is open now, and closes on the 23rd February 2023!

We’re looking forward to hearing your entires, good luck!

GPU Audio team

1 post - 1 participant

Read full topic

Is there a way to have, for example one track set to 512 lines while another at 256 apart of the same pattern sequence?

Basically what I’d like is for the longer pattern to continue while the shorter ones loop.

Apologies ahead of time if I just need to RTFM diligently

1 post - 1 participant

Read full topic

I am talking about the beginning of this song (0:00 to 0:10) linked here seventeen - YouTube

I’m not sure but did the author made 2 tracks with sine wave chords playing alternately and added a distortion + some other stuff to the second track? Sounds like it at least for me

2 posts - 2 participants

Read full topic

Often a vst fx has a ton of parameters, and its quite hard to find the parameter you want to manually automate… If the device parameters are expanded, there could be a live search field right next to the preset name, which filters the displayed parameters on the fly…

Maybe there could be also “pages” of two colums with some kind of pagination instead on the top right, so only 2 columns at once will be shown in this mode and you can step thru [1] [2] [3] …

At least the current way of expanding maybe like hundred of parameters is a bit counter productive in my opinion. Somehow this could be improved for faster access. Ideally Renoise could automate by itself already in the vst guis, maybe with a similar mechanism like the gui automation recorder tool.

2 posts - 2 participants

Read full topic

Didn’t figure out how to make sample and hold yet, but got other shapes
Custom LFO.xrdp (1.8 KB)
Strangely, can’t map B to LPC, it just doesn’t work for some reason

1 post - 1 participant

Read full topic

To make it easier I uploaded the file:

Dropbox test1.xrns

Shared with Dropbox

It seems that when I automate the gainer(attached to lfo) in the instrument section , lfo seems to not operate as it should , syncing goes on and off . Disabling the gainer’s automantion fixes the issue . Why is it behaving like that? What is wrong with my setup?

1 post - 1 participant

Read full topic

I’m trying to understand the following part from the documentation:

By default, instruments that make use of FX Chains will only be played in a single track in Renoise, or a single output bus in Redux.

I have an instrument with a kick and a snare. Both send to an fx-chain with rev+delay. Both samples play in a different phrase.

When I play the kick phrase in sequencer/track-1 and the snare phrase in track-2 the fx is applied to both samples.

When I add a filter to track-1, it’s only applied to the kick.

Did I miss something ?

1 post - 1 participant

Read full topic

surge-synthesizer.github.io Surge

Surge is an open source digital synthesizer.

Perhaps it’s old news… yet I am totally happy about it - my dreams come true - and it works Linux. Low on resources.

And does FM, and custom tuning.

1 post - 1 participant

Read full topic

This is a simple Doofer mapped to the macros of the magnificent open source Vital synth by Matt Tytel.

VITAL MACROS.xrdp (9.6 KB)

Most of the synth’s presets include macros mapped to its own internal 4 knobs, so this is a Renoise Doofer that just assigns Renoise macros to control the Vital macros.

Just pop it on the track you’re playing your Vital synth into, make sure the Instrument Automation meta is pointing at Vital, and you should be good to go!

1 post - 1 participant

Read full topic

Hi all, I’m dipping my toes back into tracking after many years, having grown up on ST3, IT2 and OpenMPT. Renoise is looking awesome so far.

I’m currently getting my keymap set up and I’m mostly happy, except I haven’t figured out how to enter numbers into the pattern editor via numpad keys.

I’ve unassigned all other commands from numpad keys in both global and pattern editor scope. Via the conflict viewer, I can see that top-row number keys are assigned to ‘Pattern Input’, but it doesn’t look like I can explicitly assign the numpad numbers to that “command”.

Any tips? Thanks!

1 post - 1 participant

Read full topic

Hello I’m new to Renoise and I’m looking for a way to export my samples which I edited via the “Modulation” and “Effects” tabs.
When trying to right-click the sample and use “Save Sample As…” it only saves the original sample as .wav

I know there is a way to apply the effects track to the sample at the bottom of the waveform editor but I cant find I way to apply the modulation too.

Is this possible in Renoise?

4 posts - 2 participants

Read full topic

1 post - 1 participant

Read full topic

This thread is dedicated to the best Synthwave tracks ever.
So where’s the gold Synthwave has to offer? Post your favorites including a link right here.

Let me set this off with the following 10 songs:

Droid Bishop - Nightland

Fourge - Accelerator (feat. Nightlite)

Waveshaper - Artificial Promises

Morgan Willis - Black Thunder

Mitch Murder - Breeze

Lazerhawk - Somnus

Tonebox - Blue Night

Glowline - Escape

Juno Dreams - Be With Me

Mercury 82 - Midnight Run

I could continue for hours, but let’s leave it for now. I could also post a lot of stuff including vocals. I’m curious what songs @ffx and all the other Synthwave fans prefer. Let’s pool the best stuff in this thread. I think I know most Synthwave existing, but of course I want to get to know more.

1 post - 1 participant

Read full topic

Hi all,

I am trying to download the additional .xrni and soundpacks from backstage (specifically the Puremagnetik xrni), but clicking the link just opens and closes a tab - no download is initiated. I am logged in to my account as instructed with an email address, and java script is running. Right clicking either link (on the “Home” or “Extras” tabs) to save will just download the .html file.

I’m using Brave browser on Ubuntu Studio 22.04LTS, if that helps. Thanks in advance for any help!

4 posts - 2 participants

Read full topic

This is not a new trick, but I just realized that this modification is reboot-resistant, easily removable and does not require to alter the read-only system partition:

gist.github.com https://gist.github.com/b0gdanw/c99e5b2eefad19932554a713384dcc70 Disable-Ventura-Bloatware.sh #!/bin/zsh #Credit: Original idea and script disable.sh by pwnsdx https://gist.github.com/pwnsdx/d87b034c4c0210b988040ad2f85a68d3 #Disabling unwanted services on macOS Big Sur (11), macOS Monterey (12) and macOS Ventura (13) #Disabling SIP is required ("csrutil disable" from Terminal in Recovery) #Modifications are written in /private/var/db/com.apple.xpc.launchd/ disabled.plist, disabled.501.plist # To revert, delete /private/var/db/com.apple.xpc.launchd/ disabled.plist and disabled.501.plist and reboot # user This file has been truncated. show original

Works on macos 12, too. For example, if you don’t want to use icloud at all, you can disable most of its services, except apple bird. Also heavily reduces write access to the internal SSD, and therefore increases lifetime (apple ssds are usually produced by the usual suspects, samsung, toshiba etc, and have the same lifespan).

You can also disable all the surveillance, tracking, online logging, submit-diag stuff by Apple. If you don’t use photos or apple music, you can disable those scanning services, too. Don’t want your keychain in the cloud available for any unknown body? Disable it.
If something does not work as intended, you just have to delete two files in the user space of the drive and reboot. You need to disable SIP (read script comment).

Of course you really need to know which services are what for and do research.

This is my current disabler script:

Disable-Venture-Bloatware.sh (click for more details)

launchctl also seems to be able to disable services and XPCs from apps. Didn’t dive into that, but it seems to be a very powerful command now.

1 post - 1 participant

Read full topic

hey guys,

how do i recreate this bass inside of renoise itself, id rather not use vst’s if i can. i have some minor experience creating a 80s synth horn sound inside renoise itself from another tutorial on youtube but id like to recapture the sound of the bass on this song as close as possible

https://www.youtube.com/embed/V6bhe6kiUko

1 post - 1 participant

Read full topic