Renoise Forum

@Loopsalot wrote:

Heyo! New to Renoise after looking around to try and find something similar to Fast Track 2, which was my jam in the 90’s. So stoked to see the vertical tracker community still alive and well!

I got Renoise set up, plugged in a midi keyboard, but when I’m just playing around looking for good melodies, beats, bass lines, etc… every instrument in my instrument list triggers on every midi keypress, unless I change the midi input on that instrument to ‘None’. Is there a way to only send the midi trigger to the selected instrument?

I’m sure it’s something dumb on my end, and I’m still working through the tutorials, but I very much appreciate the help, and glad I stumbled into this community

Posts: 1

Participants: 1

Read full topic

@Dry_Eyes wrote:

Check it out. Everyone’s holed up trying to avoid COVID-19, so here’s a tribute to those empty streets you can see if you look out the window…

Posts: 1

Participants: 1

Read full topic

@andromeda wrote:

Hello everyone ! I would like to report my new song, Un Sogno Dove Amarci, on my soundcloud page (https://soundcloud.com/user-108952518). Dedicated to Cristina. Happy listening!

Posts: 1

Participants: 1

Read full topic

@esaruoho wrote:

Hi, I’ve been wondering. I have a ton of shortcuts for loading efx (au/vst) to TrackDSP. I do that in Pattern Editor, Sample Editor, Mixer, anywhere.

Lately I’ve started thinking, hey, having Sample FX Chains in the sample is pretty neat too.

So, can Renoise detect, or, state, that you are in the FX Effects Tab, and is it possible to load VST/AU efx into the selected instrument’s sample fx chain?

I’m basically thinking of modifying the shortcuts to either load them to trackdsp or to sample fx chain.

how would i go about doing that?

Posts: 1

Participants: 1

Read full topic

@esaruoho wrote:

I’d prefer to make it so that TAL Reverb-4 would always boot up with specific settings, specific to Renoise.

in the Init*. settings.
I’m wondering, how does one do that? I could script the presets myself, sure, and boot them up with a shortcut, but I’m wondering, is there no nicer way of doing it, i.e. “Renoise specific preset settings loaded by default, when effect is added to dsp chain”

Posts: 1

Participants: 1

Read full topic

@andromeda wrote:

Hello everyone ! Those interested can visit my soundcloud (andromeda) page to listen, comment and share my songs entirely made with Renoise 3.1.1! Thanks and happy listening!

Posts: 1

Participants: 1

Read full topic

@midierror wrote:

Yes, its frikkin tiny

midierror

Posts: 1

Participants: 1

Read full topic

@esaruoho wrote:

Hi, I’m wondering, I’d prefer to use an actual editor to edit my tool Paketti, while Renoise is open.

If I save the files, does Renoise immediately notice the changes and load them? Or do I have to do something extra in Renoise?

Posts: 1

Participants: 1

Read full topic

@spdk wrote:

Hi,

How can easily select an envelope over a couple of patterns and delete it? I can select them pattern by pattern, but not all at once.

I’ve added an image as an example, I want to delete alle envelopes from pattern 36 to 52, but leave 29 to 32 in place.

cut_envelope|690x175

Thanks, It’s bothering me for a long time, I’ve always selected the envelopes pattern by pattern, but that can’t be the easiest way I hope

Posts: 1

Participants: 1

Read full topic

@Spacewizardinspace wrote:

Ive been reading things and looking at things, and I feel really stupid, because I mostly am with this, but how do I record from renoise into an abelton track, im using the demo right now and trying to wrap my head around all of it, I really like the flow but im just dumber than sack of cement at a nascar rally.

Posts: 2

Participants: 2

Read full topic

@James_Britt wrote:

https://loopopmusic.com/polyend-tracker-review-and-full-tutorial-from-sample-to-song

Tracker from Polyend is a new standalone hardware groovebox based on a grid-sequencing workflow first introduced on Amiga computers in 1987.

Disappointed that they use the general term “tracker” for their product, but that’s life.

Thought folks might be interested.

Posts: 1

Participants: 1

Read full topic

@EatMe wrote:

something something

Piano House: Bossa Bien

Kthanks.

Posts: 1

Participants: 1

Read full topic

@printerrepairdubai wrote:

Paper jam

The main and general issue with the printer is paper jam, it means that paper is stuck inside the printer and printer is not working. There are many reasons for paper jam some of them are given below.

Sensor Issue: There is Optical sensor which give command to printer for picking up the paper from paper tray and print. Sometime that sensor doesn’t work and cause paper Jam for the solution for this is call UAE TECH for the professional replacement of sensor.

Pick up roller: It is soft and rubbery surface which pick the paper from paper tray. Sometime dust or dirt in roller cause for paper jam issue. It is very sensitive thing if not done by care then it can head.

Transfer belt: Transfer belt pick the paper and passes it through each component of printer to complete the printing process. Sometime due to dust, dirt or break down of transfer belt cause the Paper Jam.

Paper Tray: Sometime putting wrong paper tray to wrong model of printer can cause the paper jam and we should clean paper tray time to time to make printing process smoothly.

Size of Paper: Some time wrong size of paper in paper tray cause the paper jam issue.

Ink leakage: Toner or Ink leakage inside the printer could cause paper jam.

Motor Problem: There is a motor inside the printer to move and advance paper from tray to printer head for complete the printing process, due to motor sometime paper jam issue occur in printer.

M aintenance box: Its stores ink that gets bloomed from the system during print head cleaning. When an ink cartridge is used or the maintenance box is at the finish of its service life, you need to replace it.
Hp printer repair dubai

Posts: 1

Participants: 1

Read full topic

@Jonas wrote:

A thing that has bothered me in Renoise is being able to see in which track I’m in the pattern matrix at a first glance. I’d like a more pronounced view, have it be optional and/or be able to set the strength of the pronunciation. Extra slider(s) in the gui preferences for the lines that enclose and signify cross-hair position.

There is a difference in the graphics whether you’re focused in the pattern editor or in the matrix. When you’re working in the pattern editor, the matrix can look like this;

When the slots are empty in the matrix it is clear enough which pattern has the cursor.

When you’re focused inside the pattern editor, it becomes more unclear in the matrix when tracks have note-events / slots are full;

Notice I’m in the track named ‘bass’, you can see its differentiation in color in the top of the picture, yet the block that stands out most is a selection in a different track, empty slot in the same pattern.

Here I’d also like the cross-hair slot in the bass pattern of the 6th pattern stand out more.

When focus is on the matrix, it looks like this;

A little better with the dotted encapsulation, but also open for much improvement imo.

I’m a little colorblind and have tried different themes to see this can be improved. But think a strength setting for the cross-hair lines in the matrix would be great, having a clearer encapsulated matrix slot where the cursor resides in the pattern editor. Anyone else could appreciate pimping of the matrix cross-hair?

First world problems during the rona, sorry.

Posts: 1

Participants: 1

Read full topic

@nateflanigan wrote:

I’m trying to set up multiple outs in max msp and running into a dead end. I understand how to tell the vst~ object to have multiple outs but redux isn’t seeing them. Anyone have any experience with this?

Thanks!

Posts: 1

Participants: 1

Read full topic

@stoiximan wrote:

I think this is a must read for anyone struggling to finish a track.

Stuck at home digging through half-finished projects and songs? We're here to help

Posts: 1

Participants: 1

Read full topic

@Gella wrote:

Hi, as per thread title, is there any way within a Renoise Instrument to “force” it to output audio down a particular mixer channel?

The purpose of this is in a setup with Cubase as a Rewire master and Renoise as Rewire slave - using Renoise effectively as an external sampler triggered by Midi from Cubase, then mixing the audio back in Cubase.

Midi is working absolutely perfectly - triggering different instruments on different midi channels and all that, however, all Renoise instruments output their audio via whichever mixer channel is currently selected, making it impossible to route different instruments to different Rewire busses.

Hope i’ve explained that clearly, its got me well confused

Thanks in advance

Posts: 1

Participants: 1

Read full topic

@gentleclockdivider wrote:

It would be great if we could could get serial filter routing in the instrument editor , this would of course increase cpu usage but I think it’s worth it
Here’s an example of 2 , 4pole moog filters in series ( used in the effects section ) , notice that the resonance of eac filter stacked filter reso.xrns (778.6 KB) is also stacked …( let keep this as an option )

Posts: 1

Participants: 1

Read full topic

@RiDylan wrote:

I realize this has been mentioned before, just squeaking the wheel again because it would be a great feature. Why should I use another DAW when I just want to do everything in Renoise?

Posts: 1

Participants: 1

Read full topic

@rockfistus wrote:

Just thought I’d let ya’ll know there is a thing on Native Instruments site right now where you can get a Komplete Audio interface and it comes with Guitar Rig Pro 5 for free. I just bought it for Guitar Rig

Posts: 1

Participants: 1

Read full topic