Renoise Forum

Hello all,

I am a newbie in Renoise and Like Jungle.
So I Watched a Video from groovin in g.
In my Sampler Settings there is no repitch. So my slices will have different pitches because the lenght. Repitch Mode is disappear

How can i have the Repitch Mode?
Thanks

3 posts - 2 participants

Read full topic

Logically the routing flows from send tracks to the master track, as the final track. Unfortunately, Renoise routing seems to rely on the position of the track, the numeric index. Then the master should be placed right next to the send tracks.

Currently it is not possible to use a sidechain send device on a send track to target the master track. But it should be possible.

1 post - 1 participant

Read full topic

Hi, I’m wondering how to use lists that are longer than the height of my screen - and what i’m really wondering is if there’s a way to scroll around in the list?

2 posts - 2 participants

Read full topic

Some commands that need adding to renoise ,

One Time trigger , on pattern play , a given note on is triggered once only of the first new play of the pattern. would also enable syncopation in a phrase as it wont spoil the effect on pattern loop.

Note on every xx loops , note on will fire once per stated loops only of the main pattern. like elektron octatrack . rather then once per pattern loop.

Independent Track loop point , L00P, loops the track only everytime the loop point is reached rather then the main pattern length.

All these commands will help renoise become better at syncopation and using phrases would be come another method to produce syncopation via one time triggers. similar can be done currently using a low chance trigger on a phrase set to have less steps then the main pattern playing . but syncopation breaks everytime the chance command re- fires.

atm , also we cant trigger a phrase consistently using chance triggers to begin with to start a syncopated phrase… or it will reset at end of pattern.

a one time trigger should help phrases section and short pattern loops become more flexible.

tip: renoise should as a whole become a vsti . so to also help other syncopation methods on daw multitrack instances of renoise . each daw instance can have its own step length . or could have.

1 post - 1 participant

Read full topic

The J and S keys seems to be recognized as pressed down in the Renoise software. (When I start record, it starts to input J and S even though I’m pressing nothing)

When I press those keys on my keyboard, it stops for a second and continues to be recognized as pressed down. It was not inputing keys in other software and I’ve restarted my computer several times, reinstalled Renoise, and none of them work.

It’d be very helpful if someone could find a solution to my problem.

-----System Info-----
Renoise 3.4.3
MacBook Pro M2 2022
MacOS Sonoma 14.0

1 post - 1 participant

Read full topic

Slopity Slope

Magnetic Bass

Audio for Magnetic Bass

1 post - 1 participant

Read full topic

so i have this and have had it for years - a way to load a PPG V2 XML as a preset. but now i wanna also do the same preset storing within a script for Native Devices. But…

But I just can’t figure out how to get the XML (which i just save from the terminal):

>>> oprint (renoise.song().selected_track.devices[2].active_preset_data) <?xml version="1.0" encoding="UTF-8"?> <FilterDevicePreset doc_version="13"> <DeviceSlot type="SendDevice"> <IsMaximized>true</IsMaximized> <SendAmount> <Value>0.0</Value> </SendAmount> <SendPan> <Value>0.5</Value> </SendPan> <DestSendTrack> <Value>0.0</Value> </DestSendTrack> <MuteSource>false</MuteSource> <SmoothParameterChanges>true</SmoothParameterChanges> <ApplyPostVolume>true</ApplyPostVolume> </DeviceSlot> </FilterDevicePreset>

to do anything but output this error, when i try to load it with

if s.selected_track.devices[checkline].name=="#Send" then s.selected_track.devices[2].parameters[2].show_in_mixer=true renoise.song().selected_track.devices[2].active_preset_data="Presets/PakettiSend.xml" else end

i get this error:

*** exception: 'Failed to parse a memory XML file (^ *** )!' *** stack traceback: *** [C]: ? *** [C]: in function '__newindex' *** [string "do..."]:22: in function <[string "do..."]:9> *** ./loaders.lua:230: in function 'loadnative' *** ./loaders.lua:301: in function <./loaders.lua:301>

PakettiSend.xml (500 Bytes)

what should i do? how is this properly done?

1 post - 1 participant

Read full topic

Hi, I think (maybe I’ve misunderstood) that there’s some way of making a script auto-update.

i.e. “newer than the one version you have, update to the newest version”.

What I’m wondering is, what’s the logic for that, how is it done, and more so, how would i use GitHub Actions to create a versioning method that would automatically update the script that others have already downloaded and installed?

1 post - 1 participant

Read full topic

Hi I’d like to change the transient detection percentage:

i tried git grepping for “transient” or “detect” but found nothing. is this a case of it not being available?

1 post - 1 participant

Read full topic

i’m wondering if there’s a way of providing presets for native devices that are loaded directly from within the script itself? i.e. they are packaged as .xrnt files for instance, and instead of importing them in, they are loaded directly.

@taktik the reason i’m doing this is that for instance the Send + MultiBand Send devices do not have Mute setting control available via API, so one has to jump through hoops to get certain states of the device going.

1 post - 1 participant

Read full topic

Today i noticed that the delay columns do not influence the effect commands.

For example i was inputting a delay column value and i had an effect command of C00 on the same line.
I noticed that the effect command cut the sample without taking into consideration the delay value,so it cut the sample early before the delay command could have an effect.Is this the appropriate behaviour or has this been overlooked?

1 post - 1 participant

Read full topic

I asked #Udio to make a #DepecheMode song and here's what happened!

I’m pretty amazed by the quality AI can generate.
At some point Spotify and other music outlets will get super spammed with this.

Udio: The Insanely Good FREE AI Music Maker!

“Make your music”

Udio Udio | Make your music

Discover, create, and share music with the world.

2 posts - 2 participants

Read full topic

I stumbled on this 2 websites today so i thought i should share.Great content if you do videos for youtube or maybe use them for your own music projects,its public domain so no worries about copyright.If anyone knows something similar but with video content please share

https://stocktune.com/
https://stockcake.com/

1 post - 1 participant

Read full topic

Poly Aftertouch doesn’t work with Phase Plant (other synths work though), only mono. Noticed when I use it on DAWs such as Studio One and Bitwig I have to toggle a MPE setting just for it to work on my ATOM SQ controller. I believe Renoise doesn’t have MPE so I’m wondering if there is a work around anywhere.

1 post - 1 participant

Read full topic

The Gui for Korg’s Wavestation plugin (VST3) cuts off in Renoise.

3 posts - 2 participants

Read full topic

Walking down the streets under city lights
Feeling the energy
It’s a magical sight (sight)
People pass me by
Catchin’ their own groove
Dancin’ to the rhythm
In the city we move

The neon signs are blazin’
The stars in our eyes
Lost in the moment
We’re living our lives (lives)
The pulse of the city
It’s all in the air
Every beat of our hearts
We’re gonna share

Oh-oh
The city lights and late night vibes
Got me feeling alive
Like I can touch the sky
Oh-oh
We’re gonna dance 'til the morning light
In this city
We find our paradise

Sun - City of Lights

1 post - 1 participant

Read full topic

Hi guys, I’m Marco. Scener and composer in the 80’s, gigging musician in the 90’s and early 00’s and nowadays a working-in-IT dad and creator/maintainer of a Star Citizen related gaming community fansite.

If you’re as old as I am (in your fifties) my name might ring a bell. I am the creator of the C64 sequencer named Music-Assembler which was marketed and sold at the time by Markt+Technik, publisher of some German language C64 magazines.

I still play music (albeit on real guitars and basses) and recorded thusfar using Steinberg Cubase.

I just purchased a copy of Renoise and will start toying with it really soon.

Lately my daughter has been pushing me to make a return to tracker based music as she thinks it will bring out the best in my creativity. She had discovered some of my old eighties tracks lately after typing my name on youtube … so if new music appears from yours truly through Renoise you have her to thank for it…

Cheers, Marco

Oh and here’s some screenshots from the old sequencer software I coded myself with a friend. I borrowed the gif from CSDb…

1 post - 1 participant

Read full topic

So the way you modulate Plugin parameters with an Envelope is by using the keytracker to reset an envelope set to oneshot. Thats a nice little hack, however the custom envelope function in the lfo device is lacking in functionality, especially when compared to the actual modulation tab of an instrument. I would be totally down for an option in a context menu of a plugin, to raise the parameter of that plugin to show up in the modulation tab (even if that only works for the ones within the instruments effects tab and not the pattern editor). However if the devs wanna stick to using the keytracker LFO combo please include an a(h)dsr function so that I can work with the sustain parameter.
thoughts?

1 post - 1 participant

Read full topic

Hi,

I am selling my U-He Bazille license for 70 EUR. If you are interested, please PM me. Works on on macos, Windows, Linux. It’s the big brother of ACE.

U-He Bazille is a really good sounding (esp. in hq mode) semi-modular synth which also supports audio rate lfo modulation AFAIK. Recent beta builds, available at the u-he kvr forum also support CLAP and polyphonic modulation, so using this in Bitwig makes the possibilities endless.

I just can’t wrap my head around this synth. You need to know what you are doing while connecitng the patch cables. I come from classic workstations, so this seems to be not made for me. The presets are also quite good, as usual for a U-He synth.

3 posts - 2 participants

Read full topic

Resonate A

Enjoy!

2 posts - 2 participants

Read full topic