Renoise Forum

@tshera wrote:

Currently going through the manual and experimenting

Trying to use Renoise for breakbeats.

Posts: 1

Participants: 1

Read full topic

@brainslushie wrote:

STNR - Afleiðingar neyslu mix

this is a short mix of a few short tracks i produced around 6 months ago.
all of it was created in renoise using drum samples and noise sample wizardry and a few fx plugins.

i also want to say that i produced this around late last summer, and it was only recently that i discovered the sample loop control tool (which is now my favorite plugin/tool)… hopefully some of you will understand why i say that, when you listen to this stuff.

if you like this mix and want to hear the full release, you can download it from this link:
http://leviathansatellitedish.com/dish.11-STNR-AFLEIÐINGAR%20NEYSLU.zip

Posts: 1

Participants: 1

Read full topic

@zbouboutchi wrote:

Hi,

my first song where I sing … Pretty scary tho.
Everything is made with my instruments, my hands and Renoise with only bare plugins (and zynaddsubfx for some synths.)

Hope you’ll enjoy it !

ps: My voice is naturally awfull but I had difficulties to mix it correctly… If someone have some advices, I would be pleased !

Posts: 1

Participants: 1

Read full topic

@Ovitus wrote:

I’m using Jack and have Renoise set accordingly, but every time I launch it for the first time it says ALSA can not open and it will use Jack instead… How do I make it so Jack is always the default? It doesn’t seem to recognise my settings.

I’m on Fedora

Posts: 1

Participants: 1

Read full topic

@luisaguirre wrote:

Do any of you gain stage with Renoise? If so, how do you go about it? I also use Reason and in Reason their’s a gain knob in their mixer panel I can use to gain stage before mixing. Was wondering if Renoise offered something similar.

Posts: 1

Participants: 1

Read full topic

@brinemeister wrote:

In the ‘what you listening to atm?’ thread, if starting at most recent posts, playing some videos, then pausing them and scrolling up to play some videos from earlier posts, the previously played then paused videos all play again simultaneously.

Posts: 1

Participants: 1

Read full topic

@Fabrice wrote:

Hi!
Here is just a small track with EDM synths from VST Falcon, and hand-drawed chiptune sounds in sample editor.

First time I’ve tried the draw tool…

Posts: 1

Participants: 1

Read full topic

@neinMC wrote:

I still need to sort out my music, soundcloud etc. a whole lot, but this I like so much I wanna show it off right away.

http://a.sandboxx.org/neinMC/4415/

Here’s the instrumental, may it please ya:

http://a.sandboxx.org/neinMC/4413/

The beat started out with sampling this https://www.youtube.com/watch?v=FWQ1V7XkAeA but I ended up removing the sample, so now it’s just the beat and the bass line (which is played by Chris Hülsbeck’s MicroSynt of all things :D) from that.

Posts: 1

Participants: 1

Read full topic

@ed_froxt wrote:

Made in renoise some time ago))))

Posts: 1

Participants: 1

Read full topic

@JustinTheEmcee2380 wrote:

Used Renoise rewired into Reaper for this one. The scratches are actually wav files with the pitch U and D commands which I learned through a youtube tutorial a while back. Gotta be my favorite Renoise trick yet.

Posts: 1

Participants: 1

Read full topic

@Land_of_Bits wrote:

what do you think of this one crew !

Posts: 1

Participants: 1

Read full topic

@robert.random wrote:

I released yesterday an electronic album made with Renoise. It’s more like compilation of songs from last three years. Long songs, lots of variety in genres, no choruses.

Spotify, Apple music, Tidal, Google Play, Amazon:
Songwhip Random Works by Robert Random

Listen to "Random Works" the album by Robert Random on: Tidal, Amazon, Deezer, Apple Music, Spotify or Google Play. Free universal music links by Songwhip.

Bandcamp:

Posts: 1

Participants: 1

Read full topic

@whisp wrote:

Hi!

I’ve recently bought a new PC with an i7-8700k. It has 6 cores, 12 logical processors, which show as 12 cores/CPUs in Renoise.

The thing is: Songs i created with my 8 years old PC don’t run anymore on the new rig, due to the engine stopping “because it used too much CPU for quite a long time.”

When i check the CPU usage in the task-manager parallely, it stays at around 15% total, compared to Renoise’s 90%+ usage.

Obviously Renoise fails to use the cores for some reason.

I’ve tried it with different amount of cores set in Renoise, it didn’t help. And disabled overload prevention, and got no more message, but the song started stuttering at 99.9% usage.

I don’t know what else i could try. Any help is appreciated.

Kind regards,
Mario

Posts: 1

Participants: 1

Read full topic

@Raul wrote:

What would be the cleanest way to limit the volume of a track so that the instrument did not exceed the highest volume set, without the final sound of the track (its texture) changing too much?

That is, only recotar the highest peaks without influencing the rest of the sound along the track, with the condition that the resulting sound is as close to the real as possible.

What concrete configuration in the track’s DSP (Dynamics Devices) should I use?

Posts: 1

Participants: 1

Read full topic

@RiDylan wrote:

Ey guys I dropped an EP. 100% Renoise. Enjoy.

https://cockrockdisco.bandcamp.com/album/micro-ep

… Swag

Posts: 1

Participants: 1

Read full topic

@fredeke wrote:

Hello.

My Renoise version is 3.1.1 (build Feb 6 2017), and my soundcard is a 64-channel RME HDSPe MADI.

I’d like to route each Renoise track to a different output, in order to mix my songs in an analog mixer. However, in each track’s output menu (as well as the master track’s), only the first two channels are available. This menu used to offer all 32 stereo pairs as possible outputs, but now it only shows channels 1 and 2 as one sole stereo output.

Same problem with the inputs (though that I could live with) : only the first two inputs appear in Renoise, where all 64 used to.

I don’t know what has changed in my config. Other DAWs like Reaper still see all the ins and outs, and I am still using the ASIO engine in Renoise (I didn’t switch to DirectSound). Also, RME’s mixer util is in “DAW” mode, which means it is bypassed, and supposedly not messing with routing.

Does anyone know what could be the problem ?
Please help, I am stuck.

Thanks

Posts: 1

Participants: 1

Read full topic

@Ghost_Train wrote:

I’m just trying to learn the different commands and trick here. I am trying to figure out how to fade out a sample with no success yet.

The Effects Commands reference card shows
Oxx - FadeOut - xx = amount in steps of 1/256,00 = repeat.

I’ve tried both O01 and O256 in the FX column on the step the sample is triggered and any steps after.
I’ve tried repeating the same command on every step. The sample remains unaffected and continues to play out as normal.

What is the trick to make fades work?

Posts: 1

Participants: 1

Read full topic

@Garth_Knight wrote:

I thought I managed to work this out but cannot for the life of me remember …

I am trying to do 6/8 at 80 bpm ( I do mostly epic trailer music)

I need to be able to do 8th and 16th notes without messing with the lpb during the tune

Please can you help!!

Posts: 1

Participants: 1

Read full topic

@cupcake wrote:

Hi, this is a simple tool i started years ago to just count the number of lines selected in the pattern and display the result in the status bar. It was intended to be of use when playing in notes ‘rubato’ style, and helping to line stuff up. I think i intended to use the count to set the correct BPM eventually, but never got around to that part yet. I have cleaned up the code and commented it. There’s probably some redundancy in there, but it works quite well.

The next step for this tool is to add a menu entry and some options, like setting display time-out, an enable switch, and an offset timer to allow other status messages to display first, because as it is it interferes with other tools’ use of the status bar to show messages.

I might also add some kind of option to change the edit step based on the selected number of lines, as that could make it more useful perhaps.

Ok,byebye.

greasy.cupcake.LineCounter.xrnx (2.3 KB)

Posts: 2

Participants: 2

Read full topic

@Dry_Eyes wrote:

It’s just raining 14 minute EPs by Dry Eyes here (maybe time for a full-length so I don’t clog your board, eh?) More drum n drone with a lot going on at one time.and yet quite a bit of variety. Ridiculously expansive tribal drumming, interesting harmony. All things Emanate from the Nameless!

Posts: 1

Participants: 1

Read full topic