Renoise Forum

@stoiximan wrote:

Here is a new one.I do some singing here but need to find a better vocalist and add more lyrics.Not yet finished but i am pretty happy so far.Lyrics are in Greek

Posts: 1

Participants: 1

Read full topic

@sroccaserra wrote:

Hi, as seen in this thread, I have started this tool to load 8 bit samples from the Amiga era (IFF and RAW 8 bit signed mono PCM only) in their original format:

• https://github.com/sroccaserra/renoise-8-bit-sample-loader

Reviews and help are welcome, particularly on this part:

• What is the proper way to convert a [-128, 127] int value to a [-1, 1] Lua float value? I’m dividing the int value by 128 and the result sounds right to me (at least exactly like loading the file from outside my tool), but is there a better way?
• I’d like to be able to load files from my tool by right clicking them in the disk browser. I could add a menu item there, but I can’t access to the path of the file that was right clicked. Is it possible?

After installation, this tool adds a 8 bit sample loader > Load IFF or RAW file… menu entry to the Tools menu.

Clicking on it opens a file browser. Selecting an IFF or RAW 8 bit signed mono file will load it in the current instrument’s current sample

For IFF files: sample rate, loop start info, and sample name are used if present. Octaves and compression are not supported (maybe a nice addition).

For RAW files: a sample rate of 16726 Hz is assumed (allow to customize this would be a nice addition).

Tip: try turning off interpolation in the sample options for that extra 8 bit noise. After that you can try a ~ 7 kHz low pass filter to tame some of it.

Note: this needs more tests at the moment.

If you want to try it you will need the files in their original format:

Also, the originals unedited files are here:

• https://archive.org/details/AmigaSTXX

Samples I tested the IFF loader on:

• st-01/strings6 = base sample and loop are clicky (I need more checks on this part if you want to help)
• st-02/fatbrass = no loop
• st-02/guitar1 = uselessly looping?
• st-17/Afterthought = nice loop
• st-17/badsample = a nice loop from Bad
• st-17/bass.drum = ends with a silent loop ?
• st-17/brass1 = no loop
• st-17/BrassEns.1 = no loop
• st-17/Fantasy2 = nice loop

The ST-17 directory looks like a good one to test IFF properties.

Posts: 1

Participants: 1

Read full topic

@encryptedmind wrote:

Hello Renoisers,

I am in Czech Republic for the next 2 years, and would be great to connect with some of you who may be in and around Czech Republic. Finally I get to be in touch with the Demoscene in person and not just remotely. I would be truly happy to meet locals who use Renoise.

Posts: 1

Participants: 1

Read full topic

@BrainClaim wrote:

Hey guys, tis a new song made out of modified sheep voice, with the help of Manipulator (plugin from the Infected Mushroom guys), I hope you like it. Any criticism is welcome

P.S. There is some Prodigy vibes in it.

Posts: 1

Participants: 1

Read full topic

@Land_of_Bits wrote:

Posts: 1

Participants: 1

Read full topic

@Tarek-FM wrote:

Attempting to drag and drop install Grid Pie(and this also appears upon launching Renoise):

‘C:\Users\kibbles\AppData\Roaming\Renoise\V3.1.1\Scripts\Tools\com.renoise.GridPie.xrnx’ failed to load.

Please remove this tool or contact the author (Dac Chartrand [dac@renoise.com]) for assistance…

main.lua:1: module ‘toolbox’ not found:
no field package.preload[‘toolbox’]
no file ‘C:\Program Files\Csound6_x64\examples\lua\toolbox.lua’
no file ‘C:\Users\kibbles\AppData\Roaming\Renoise\V3.1.1\Scripts\Libraries\toolbox.lua’
no file ‘C:\Program Files\Renoise 3.1.1\Resources\Scripts\Libraries\toolbox.lua’
no file ‘C:\Program Files\Csound6_x64\bin\toolbox.dll’
no file ‘C:\Users\kibbles\AppData\Roaming\Renoise\V3.1.1\Scripts\Libraries\toolbox.dll’
no file ‘C:\Program Files\Renoise 3.1.1\Resources\Scripts\Libraries\toolbox.dll’
stack traceback:
[C]: in function ‘require’
main.lua:1: in main chunk

Phrasetouch(same process):

‘C:\Users\kibbles\AppData\Roaming\Renoise\V3.1.1\Scripts\Tools\com.ulneiz.PhraseTouch.xrnx’ failed to load.

Please remove this tool or contact the author (ulneiz) for assistance…

main.lua:486: module ‘lua/midi_in/midi_in_main’ not found:
no field package.preload[‘lua/midi_in/midi_in_main’]
no file ‘C:\Program Files\Csound6_x64\examples\lua\lua/midi_in/midi_in_main.lua’
no file ‘C:\Users\kibbles\AppData\Roaming\Renoise\V3.1.1\Scripts\Libraries\lua/midi_in/midi_in_main.lua’
no file ‘C:\Program Files (x86)\Renoise 3.1.1\Resources\Scripts\Libraries\lua/midi_in/midi_in_main.lua’
no file ‘C:\Program Files\Csound6_x64\bin\lua/midi_in/midi_in_main.dll’
no file ‘C:\Users\kibbles\AppData\Roaming\Renoise\V3.1.1\Scripts\Libraries\lua/midi_in/midi_in_main.dll’
no file ‘C:\Program Files (x86)\Renoise 3.1.1\Resources\Scripts\Libraries\lua/midi_in/midi_in_main.dll’
stack traceback:
[C]: in function ‘require’
main.lua:486: in main chunk

Why is Renoise searching in my Csound6_6x64 folder?

It is not set as any search path(to my knowledge).

Awesome Sawce And Find and Replace both load fine.

I can reproduce the same error in 64 bit 3.1.1 and 3.1 as well as 32 bit 3.1.1

I am on windows 8.1

The tools in question load fine on another computer running windows 10 on 3.1 64 bit

Thx in advance for any light shed.

Posts: 1

Participants: 1

Read full topic

@noperator wrote:

Hi guys and gals, I’m new to using the ZLxx ZKxx commands and I’m a bit confused. my LPB of a song I’m working on is 4 by default. About half way through the song I want to change it to a 12/8 feel, so I add ZL06 to my FX column on a track. For some reason the last beat is truncated back to 4 LPB instead of 6 like the rest of the beats. What am I doing wrong? I want all of the beats to have 6 LPB. See the highlighted section in the screenshot below.

Posts: 1

Participants: 1

Read full topic

@getit wrote:

Hello there!
I was thinking about merge some xrns files to share its structure and patterns. Is there any tool to do this?
My project working method is below:
I begin with a loop small idea, any chopped sample.
I record performing any live idea with stringed instrument (guitar, lute, bouzouki etc)
After that I tend to rec midi with noodle trap (disabling any previous instrument). Say 7 or 8 phrases for each instrument: bass, strings, lead, drums
When I have free time I start building my material through matrix.
I start from loop pattern, after that solo stringed instrument patterns. In my method I have a matrix of 4x4 array to play around:
(90) stop ZT00
(91) C4-03 z01, C4-04 z01, C4-05 z01, C4-06 z01
(92) C4-03 z02, C4-04 z02, C4-05 z02, C4-06 z02
(93) C4-03 z03, C4-04 z03, C4-05 z03, C4-06 z03
(94) C4-03 z04, C4-04 z04, C4-05 z04, C4-06 z04
in this example 03, 04, 05, 06 are bass, strings, lead, drums
I enable some patterns I like and reuse them as aliases (91,92,93,94 are my pattern numbers, autoseq is off).
If I use for example bass 91 pattern and phrase 08 is better, I remap z01 to z08 in any alias z01 (there is such a tool)

I want to reuse some phrases but with other multisample instruments. The only solution is to export phrase and realign new samples.
How to reuse my 4x4 matrix in other projects? (I managed this with copy-paste in AE)

Ideally I would start with a template like in my image, and replace instruments or (and) phrases! if it was possible

I could change my instruments with double click in previous projects, keeping my style unique!

Posts: 1

Participants: 1

Read full topic

@Thundard wrote:

Now it’s easy

Posts: 2

Participants: 2

Read full topic

@ffx wrote:

I really have problems to understand what the cause is for this: Lately one of my audio interfaces failed, so I had to switch to an interface only supporting non-symmetrical connections to the speakers (2 wires instead 3). Now at this place here, I again can hear now the cpu and harddrive accesses in the speakers as kind of digital “noise”. And the more cpu load, the louder it gets . Though on the other place I do music, using the same audio interface and computer, I do not get those noises. The only difference is the speakers and the place/electrical wires. I also tried to switch the power sockets, it seems to be a bit quieter then, but no real change.

So is it caused by poor shielding in the speakers? The current speakers are Presonus Eris E8. I think Presonus hardware usually is pretty nicely shielded, but I don’t know. I also checked the grounding of the power sockets with a multimeter, seems to be alright.

Posts: 1

Participants: 1

Read full topic

@ffx wrote:

Here is a list of feature improvements for 3.2, which may be relatively easy and quick to implement. Feel free to add your own ideas and comments to others’ posts in here, but please only try to add easy stuff (no pianoroll, no changes requiring API changes etc.), stay on topic and only one post per person. Thanks. This also is not meant to be very important, but nice to have. So since Taktik’s time is limited, it probably won’t be added.

1. VU meters The peak bar currently falls down always. Instead it could behave just like Melda plugins, so the bar stays on peak and resets each 3 seconds or so. Then you could read the actual peak value much more easy. Additionally the exact peak value in dB will be shown in the tooltip on mouse-over

2. PDC report It currently lacks a bit of useful info, e.g. even a empty track will be listed with the maximum latency, so the report actually does not show the actual latency of the track, but instead the internal latency calculation or so. It also could be somehow sorted and displayed in a table

3. Sequence section If you add a section to the sequence, it will be usually displayed on the right, with enough horizontal space. But if you also expand the comments in the sequence, the section title moves to the column of the comments, which is very limited in space. Instead the section title could stay in the right area.

4. Copy/paste automation Each slider automation indicator could provide “copy automation in song/copy automation in pattern” and “paste automation” in its context menu, so cross copying of automation was nicely easy and integrated into Renoise. Currently it is only possible with a lot of clicks and actions or using a tool.

5. Moving fx automation If a plugin/fx was moved to another track, it should keep all automation. You still then can delete the automation.

6. Selection in sequence In the adv. tools it would be helpful to have a selection in sequence option.

Posts: 1

Participants: 1

Read full topic

@slujr wrote:

Hey all,

here’s another jam, a bit higher bpm than usual. 100% renoise dsp and sound design. hope you enjoy!

Posts: 1

Participants: 1

Read full topic

@BG42 wrote:

Hello,

sorry for bringing up an old problem but the solutions on this forum so far seem to not help me.

I have a keyboard and an APC mini, on neither of which I can set output MIDI channels.

But I’d like to control the interface with APC and record notes with the keyboard.

So I’d like renoise to differentiate the signals, yet they’re both Channel 1s…

Midi Management Console doesn’t seem to manage. What to do?

Thanks very much ahead.

BG

Posts: 1

Participants: 1

Read full topic

@EatMe wrote:

free download on eatme.pro/music

Posts: 1

Participants: 1

Read full topic

@delt wrote:

Hello, i haven’t posted here for a while. I find the navigation of instruments, samples, and modules really annoying in renoise, for several reasons:

• Symlinks are ignored: this is MAJORLY annoying. Granted, it’s not often you have many symlinks directly to module or inst/sample files, but there’s no way (other than manually editing the config files) for ex. to use a symlink “renoise” that points to “rns_whatever_version” and therefore i have to update all my “favorites” paths each time i install a new version. I usually just use sed command / regexp on my config files, but it’s still very annoying and makes renoise feel like a “cheap ho”.

• Can’t type a path directly, even without tab completion. ie let’s say i know i want to go to /usr/track or /usr/track/samples, it’s much quicker to just type that (about 1 to 1.5 second) than futz around with the mouse trying to incrementally find each successive entry in the list (10 to 20 seconds) - especially when these lists contains hundreds or thousands of items, that are sorted in some weird manner (.xrns first, alphabetical, then .it alphabetical and so on)

• Can’t see current path for modules, instruments, samples: pretty much the same as the previous point. I just see i’m in directory “renoise” - but i have at least 4 or 5 directories named “renoise” on my filesystem in which what i’m looking for (or where i want to save) might be located.

• This is a relatively minor one, but selection buffer / middle-click to paste doesn’t work to/from any text-entry in renoise, including filename or dir/path boxes. To copy/paste, i need to use the mac/windows “1. select, 2. copy, 3. click dest, 4. paste” method which overwrites whatever i have in my copy/paste clipboard, and is also slower.

So, my suggestion (actually i’d consider this a bug report) is to make the file management/navigation so that i don’t need to have a term window or sometimes 2 open, and always compensate for every aspect of renoise’s interaction with my filesystem being limited to the microsoft-imposed, childish and inefficient way of thinking of (and using) computers.

Posts: 1

Participants: 1

Read full topic

@lou_ferrigno wrote:

https://synkretic.bandcamp.com/album/bootleg-vol-2 Compilation of tracks I’ve made/remixed in Renoise 3.1 the past few months, check it out if interested

Posts: 1

Participants: 1

Read full topic

@bzakirasantjago wrote:

hi,

my new videomusic mashup :

Monster MashUp - Bz Akira Santjago from bz akira santjago on Vimeo . la voce, per alcuni parlati, questa volta me lha prestata il m...

Bz

Posts: 1

Participants: 1

Read full topic

@Dry_Eyes wrote:

Check out my newest…the music is as neat as the name!

Also, all recent releases by me are available on the various popular streaming services as well as online stores, so you can listen to the music on many platforms.

Posts: 1

Participants: 1

Read full topic

@Neuro_No_Neuro wrote:

I found this web/HTML music sequencer online a few days ago, and thought it would just be a dumb little squidgy Nintendo/Atari sound maker.

I was wrong. Way wrong.

It’s got NES/Square/Harmonics/Spectrum/FM synthesis. And it’s editable. And it runs with little to no pull on your computer on the Internet. I begged the guy to build us some synths for Renoise, but I want to say, if there is anybody out there that can see and hear this amazing little box, would you please make this for us?

Yeah, I’m probably asking for a lot. Whatever, it’s damn cool! Sure I can sample from it, but I’d rather have a tone generator that makes these sounds IN Renoise so I can just make 'em and run with it. It’s amazing.

Here at BeepBox.co:

I made this in 5 minutes. It’s out of this world, and it’s saved all the patterns and sounds in the code, just click it and listen!

https://www.beepbox.co/#7n31s0k0l00e03t2mm2a7g0fj7i0r1o3210T3v0u03q1d6f9y1z8C0SU005040woo22190T5v0u05q3d5fay3z8C0c0h0HU70U0000000000T1v0u01q1d1f6y2z2C0c0A0F0B0V1Q0000Pff00E0111T4v0uf0q1z6666ji8k8k3jSBKSJJAArriiiiii07JCABrzrrrrrrr00YrkqHrsrrrrjr005zrAqzrjzrrqr1jRjrqGGrrzsrsA099ijrABJJJIAzrrtirqrqjqixzsrAjrqjiqaqqysttAJqjikikrizrHtBJJAzArzrIsRCITKSS099ijrAJS____Qg99habbCAYrDzh00b4h4h4h4h4h4h4h4h4h4h4h4h4h4h4h4h4h4h4h4h4h4p21BFEYcOSqf3AOVhcOTd7SMmpo2CzS0zwieYzwie38U4zL8U4z0mqfan1BpbQQvN7jgnNqhQQh5u0IQpMqqc3A96S0A9ahLIHJA82h00

Posts: 1

Participants: 1

Read full topic

@Redman wrote:

Quick little saturday jam session

Posts: 1

Participants: 1

Read full topic