Forum

Hello. As a citizen of Russian federation, i have a trouble committing payment to purchase Renoise license. Is there any legal way of ordering license of such software?

1 post - 1 participant

Read full topic

• Brief description: When dragging and dropping a midi file from a VST or from Explorer that has more columns, it only loads 1 column.
• Steps to reproduce: When I load a chord progression midi, with 3 notes on 1 line. Or when I drag&Drop a chord prorgression from a VST.
• Expected results: The chord progression should open in 1 track over several columns.
• Actual results: The track only gets 1 column, and does not load the other notes on the same line

2 posts - 1 participant

Read full topic

While I was making a custom mechanical keyboard for a friend, I got the idea that I could make a Renoise specific keyboard. It would be a standard USB HID keyboard with CherryMX style switches and a nonstandard layout.

I repeatedly get lost anyway when inputing notes on a qwerty keyboard as I’m a hobbyist and I use Renoise infrequently. I know there are several options from marking the keys, practicing, using a midi keyboard… I want to see if something neat/useful/fun pops out of this.

For size, I aim for 5 rows or less in height, and not wider than a full sized keyboard. I want to put it under my normal PC keyboard without rearranging my desk.

This abomination is the first draft that I made:

A started with this diagram which highlights the note editing keys.

I rearranged the note keys so the top rows are a bit offset. I left out the keys which do not correspond to notes as this isn’t for typing. I also added a hexadecimal numpad, which sounds useful to me but might be an unnecessary gimmick. The rest are just sprinkled around at the leftover spots without a strong concept behind.

I’m also considering making it a 2 row keyboard instead and use my regular keyboard for the keys that do not fit.

The layout/design is very much in a state of flux. I wanted to throw the idea out there early to get some insight from you guys. Thanks for any tips in advance!

2 posts - 2 participants

Read full topic

Is there a way to make it so clicking in the pattern sequence matrix will “Grab” a pattern at first click instead of initiating a Drag/Multi Select? With just about every other GUI interface if you want to multi select you hold down shift. It is kind of annoying it defaults to this behavior.

1 post - 1 participant

Read full topic

When I go to https://renoise.com/ the browser is complaining about a privacy/cert problem.

The forums aren’t affected.

IS THIS A NEW LAUNCH?!

1 post - 1 participant

Read full topic

Hi!

I am very interested in purchasing Redux to use in conjunction with Ableton Live. In this reddit post the OP mentions that there is some difficulty editing phrases because they begin on the first MIDI beat which sounds like it can make editing phrases at certain points difficult if it is not lining up. Wanted to clarify if there is a work around, if this has been fixed, or if this is not as a big deal as it seems to be.

Second, I wanted to see if I could get a direct answer about MIDI out functionality ever being implemented so that Redux could be chained or trigger other plug-ins/hardware.

Thank you.

1 post - 1 participant

Read full topic

There’s one thing that I’m really, really missing from other DAWs and that’s the ability to not care about hitting record (I like to compose most of my music by recording live performance parts).

I’m not exactly sure how this would be implemented best in Renoise, but I’m thinking of a constantly recording buffer and the same way Ableton does it (Capture Notes)… Maybe others could chime in on exact implementation. I just wanted to throw this out there, as the one and only request I’d have for the next milestone of Renoise.

1 post - 1 participant

Read full topic

Referring to a question I posted earlier, I’d like to use modifier keys when dragging samples into the Keyzones editor, to have them placed on a single key and optionally (by using another modifier combo) have them sorted into velocity ranges on that same key.

Suggested behavior:

• Hold CTRL while dragging multiple samples into Keyzone editor to place them on the same key
• Hold CTRL + SHIFT to place them on the same key and automatically arranged into velocity ranges.

4 posts - 2 participants

Read full topic

I’ve had Renoise for I guess ten years but always put it aside because I didn’t find it intuitive to do basic things. This time around I actually want to find out how to do these things, in as simple methods as possible, preferably using single-step operations (one hotkey combination and done). Here goes:

1. How do I clear the current column that the cursor is in?
2. How do I deselect a currently selected column?
3. How can I clear the current cell including any effect parameters, without interfering with my clipboard?

8 posts - 3 participants

Read full topic

Making a drum kit with several round-robin samples, meaning there’s multiple sample variations of the same hit, on the same key.

When dragging in samples, they always tend to be distributed over the whole keyboard. How can I have them on a single key without having to afterwards go in and change their Baset Note and Note Ranges?

3 posts - 2 participants

Read full topic

Hello, dear friends!
This is a little fragment of my upcoming IDM track using some Renoise commands and Glitch2 on my master channel, which can manipulate the sounds in fantastic way !

https://www.youtube.com/embed/aEcTE5oUD1s

Do you use @dblue 's Glitch2 in your productions too?

1 post - 1 participant

Read full topic

I notice that there are on-line tutor session for all other DAWs. Through sites like Wyzant or Lessons.com you can pay a fee for private help. Is anyone willing to do that for Renoise? This could be a good way to make extra cash but i cant find anyone who does it.

1 post - 1 participant

Read full topic

i cant get renoise demo to load any driver on my raspberry pi 4b on the 64bit os. loads fine otherwise. i wana use this! any pointers?

1 post - 1 participant

Read full topic

Record notes Chordjam via OP-Z midi echo:

1. load Chordjam in [slot01]
2. Set midi routing in plugin tab [slot01] to [slot02]
3. load VST in [slot02]
4. select “OP-Z” in “output device” in [slot02]
5. select “OP-Z” in “input device” in [slot03]
6. in [slot03] set “assigned track” to record midi to track-xxx
7. when armed, Chordjam output notes will be recorded to “assigned track” with no delay

Remark:

• I this case is use Chordjam, but any note generator plugin can be used
• Be sure that the midi in & out + midi echo is enabled on the OP-Z
• with “slot” I mean instrument slot
• track-xxx is desired track to record notes to, it can also be set to “current track”

1 post - 1 participant

Read full topic

I recorded a lyrebird’s song with an old tape deck and when I listened back, the music was a combination of the lyrebird and whatever demos I’d had on the tape I recorded over. Not sure how exactly it all happened, a cosmic mystery for sure. The resulting music was a stream of short, folksy songs about ghosts and the passage or stopping of time.

1 post - 1 participant

Read full topic

I’m trying to sequence my Dreadbox Typhon, using a normal DIN-5 midi cable from my MOTU interface, and “LineIn Ret” mode. The timing seems good enough, but I can’t choose the bank/program.

The Typhon is a bit peculiar in that it uses Midi CC 0 only, and not 32. If I use Inst Midi Control to send CC0 = 3, then PC 5, then it will select bank D, program 1 as selected. (Note: the Typhon menus are 1-indexed, not 0-indexed).

Is there any way I can get Renoise to send just CC 0 and not 0+32?

I tried putting this in as midi instrument controls, then sending them using the FX column but that seems to be ignored. If I manually click the bank (CC0), then PC under instrument midi controls then it does select the correct patch.

2 posts - 1 participant

Read full topic

Using the key tracker to reset an LFO works great, but what if you want to reset many LFO’s/Devices at once? It is messy to have a ton of key trackers just to do this.

What if you want one key tracker to reset multiple LFO’s/Devices? And what if you wanted one of those reset LFOs to control many devices? This device chain does all that.

KeyReset Envelope To Hydra.xrnt (17.4 KB)

1 post - 1 participant

Read full topic

Brief Description: This bug (I assume it’s a bug) just started suddenly today on a song I am working on. In a specific pattern (Pattern #16) of my song, at line 31, my bass will cut off suddenly when the track is not solo’d, but when solo’d it continues as normal. This only occurs with my current instrument on this one pattern in this one track. All other tracks are muted so I don’t think it’s phase related. I copy/pasted the pattern from elsewhere in the track and it repeated the behavior. This same pattern is used throughout the song and this issue only occurs on Pattern #16, it works as intended everywhere else. Additionally, the playhead continues to move forward on the sample waveform so it isn’t stopping play suddenly to my knowledge. I have also tried copying the track and using that and the issue persists.

Steps to reproduce: Play the song linked here starting from Pattern #16 with the bass (the track is titled simply “Bass” and is colored deep blue) on (but not solo’d). Everything else is muted. Then play Pattern #16 with the bass solo’d and see the difference. Note that the instrument (Instrument 09) will cause this issue at the same line regardless of pitch or when it begins play, as long as it plays before Line 31.

Find the file here

Hope it’s a me problem and not my file so I can learn what not to do!

1 post - 1 participant

Read full topic

Just yesterday new material from Autechre was discovered online and posted to youtube. Sean has been active in the comment section answering fans questions. He has confirmed that Track 5 was sequenced using Renoise in 2007. Check it out!

Track

1 post - 1 participant

Read full topic

I have a question is there a good program for your pc mp3 or mp4 music or video to download for free, i mix a lot, also make it dolby surround, effects. if anyone knows a program can you give the name of the program, friendly thanks

1 post - 1 participant

Read full topic