Forum

@midierror wrote:

Alas, not made in Renoise - but a track none the less! Free downoad cos I accidentally deleted the session!

midierror

Posts: 1

Participants: 1

Read full topic

@U4iC wrote:

I have been talking a bit about a sample pack coming. Decided to backtrack and re-sample all the menu kits from the MC505 instead of rhythm kits…

This is a demo track. It will be included with the sample pack as .xrns. Should have the pack up public soon.

Posts: 1

Participants: 1

Read full topic

@jmarcels wrote:

Hi there,

I’ve recently reinstalled the Renoise Demo after getting my Macbook fixed and I’ve noticed an issue that I didnt encounter before the reinstall - the UI is very unresponsive. The major area I notice this in is the main tracker view - scrolling the pattern is very laggy and was definitely not like this before. The other thing unusual that I noticed was during first startup, two crashes happening during the scanning of two plugins, plus another two crashes after deleting my config files and having it rescan - this time being a different plugin. I attribute this to the plugins but i thought it was worth mentioning. I have followed the advice in this post, and these were my results: I restarted renoise and had it crash twice on plugin scan (seer above), then once it loaded on the third time and interface was not laggy, it was back to normal - I then went into fullscreen, and the lag started. Exited fullscreen and the lag persisted. Only a restart helped.
I’m using Renoise 3.1 64bit, on MacOS v10.14.5.

Could anyone help me troubleshoot this? I’d usually attribute such lag to my laptop’s retina screen but as I have used Renoise before on this machine I know that it has worked just fine.

Any ideas on what this may be? Many thanks!

Posts: 1

Participants: 1

Read full topic

@EETTEE wrote:

My best track by a large margin. Can’t wait to make more like this

Posts: 1

Participants: 1

Read full topic

@lilith wrote:

Maybe I just don’t understand the principal. I can do automation via the automation lane or via track effect commands. The automation lane seems to have priority over track effects.

Is there any reason why there are no automation lanes generated when using track effects commands and vice versa?

Posts: 1

Participants: 1

Read full topic

@gentleclockdivider wrote:

Any cirklon users here ?
I ordered mine on november 2017 , just received an email I’ll probably get it around beginning of 2020 .
Yes the waiting list is LOOONg , the good thing is that I will receive the cirklon V2

Posts: 1

Participants: 1

Read full topic

@Land_of_Bits wrote:

Posts: 1

Participants: 1

Read full topic

@Garrett_Wang wrote:

I want to make my instruments made from looped single-cycle-waveform samples sound a bit better and more pro…reading through the adlibtracker manual i found out that to set up a little bit more pro-sounding instrument I should use ‘key scale rate’ (attack and decay becomes shorter as pitch inscreases) and ‘key scale level’ (volume decreases as pitch increases). How would I achieve this in renoise?

KEY SCALE
When set, makes the sound shorter at higher frequencies. With normal musical instruments, the attack and decay rate becomes faster as the pitch increases. The key scale rate controls simulation of this effect.

KEY SCALE LEVEL
When set, makes the sound softer at higher frequencies. With musical instruments, volume decreases as pitch increases. Level key scaling values are used to simulate this effect. If any (not zero), the diminishing factor can be 1.5 dB/octave, 3.0 dB/octave, or 6.0 dB/octave.

Posts: 1

Participants: 1

Read full topic

@Trevor wrote:

The timeline keeps moving around after I have loaded a full length track.

What could be the problem?

Posts: 2

Participants: 2

Read full topic

@natraj wrote:

Hi!

I am a bit confused. Based on what I am used to I would expect that left-clicking (button down, button up) into a cell will move the edit cursor into that cell, and drawing a selection would work like button down, move to different cell, then button up.

The latter works as expected. But a single click will only select a single cell without moving the edit cursor there.

I found a preferences option that says “Single click to set cursor in edit mode”. That makes the edit cursor move into the column that I have clicked, but not in the right line.

Is there an option to simply single-click a cell and move the edit cursor to it?

Posts: 1

Participants: 1

Read full topic

@stoiximan wrote:

Do not listen on monophonic device cause i suck at mixing:sweat_smile:

Posts: 1

Participants: 1

Read full topic

@OopsIFly wrote:

Hi I see people started posting Doofer presets here - nice thing. I want to share one I made a while ago.

When the normal distortion isn’t gritty enough for you, this one can have much more character…

It is kind of complex distortion effect, that can sound similar to the classic “Fuzz” type distortion, with asymetric distortion. It can give interesting results on almost any kind of sound…even a simple sine wave lick can become a living being using this little beast…

Dials are:

Drive - main (asym) distortion intensity
Sat - additional (symmetrical) saturation
FLT - a lowpass filter that will reduce the highs and bring in some character when dialed in
Edge - low value = smoother sound, high value = gritty sound
DC - when at 50%, the distortion is symmetrical - dial lower or higher to introduce a DC shift up/down
Uber - when at 50%, sound is neutral - dial lower to put disto focus on bass, dial above 50% to put focus on highs

Though it does use a DC shift, it will also highpass the sound to remove it afterwards. Some peaks might get a bit stronger by the shift, so use Sat or take special care…

Have fun with this little beast!

FuzzleBuerste.xrdp (24.7 KB)

Posts: 1

Participants: 1

Read full topic

@EETTEE wrote:

A really popular effect where as a lowpass filter is applied to the sound a bitcrusher with a changing rate is dialed in. When Cutoff is at 100 nothing is being done to a sound except for what an 8n Chebyshev lowpass filter does at 20 khz (pretty much nothing). So unlike the highpass variation of this plugin I posted earlier, it’s safe to let this one chill out on a bass.

Just automate the cutoff from 100 to 0 in a short ramp and you’ve got a really cool effect to see a sound off. This is a hot one bois

Bitcrush-LP Filter.xrdp (7.1 KB)

Posts: 1

Participants: 1

Read full topic

@Garrett_Wang wrote:

I heard heard the casio XW-PD1 aka ‘millenium falcon’ was seen on German online shops for under 50 euros?!

I would like to get hold of one at that price but dont speak german, cant locate.
If any one knows where they are please put a link. thanks for your time

these look pretty fun and battery powered for the portable backpacker finger drumming.
at that price I would definitley buy…it actually looks pretty fun has synths and sampling.
…all the other battery powered and finger drummable things are so overpriced and quite shitty to be honest, stuff like boss dr880…mpc500…damn they are expensive for what they do.

Posts: 1

Participants: 1

Read full topic

@LofiMat wrote:

I might found a bug in the renoise delay - device (simple one) - it is set to ping/pong LR - Trying to center both L/R seems a struglle, it somehow doesnt work properly (easy) to zero/center the Pan. A doubleclick shift to the right - a right click opens automation.

imo - it should zero/center with double - clicking, which it does not - its mad fiddly to set it to 0.

Dank

Posts: 1

Participants: 1

Read full topic

@Garrett_Wang wrote:

Put your lyrical improvizations, poetic sentences, general mumbo-jumbo, bugged out nonsensical rants, haikus etc. in here…

Posts: 1

Participants: 1

Read full topic

@helltrack wrote:

(topic withdrawn by author, will be automatically deleted in 24 hours unless flagged)

Posts: 1

Participants: 1

Read full topic

@Rex_Sathum wrote:

FYI He’s done it again, 10 years later - all done as part of the RPM challenge in February!

I love what I’ve heard so far, and the making of videos are very inspirational:

https://www.youtube.com/user/Hunzmusic/videos

Posts: 1

Participants: 1

Read full topic

@helltrack wrote:

Is it possible when setting up a looped pattern and recording midi to with a keyboard, to only keep last take and not having notes overdub from the last round about of the playhead?

Posts: 1

Participants: 1

Read full topic

@helltrack wrote:

How about a simple stepped binaryish Zoom Out only feature, that in essence just hides every second row in the pattern editor (and so on) in the sequencer? Of course notes that fall on the subdivisions of the offbeat would be hidden if you zoom out, but maybe this is also quiet handy because it would allow you to see and work on the backbone of your beat with every zoom level simplying the view of your rhythmic structure.

Also wouldn’t require a complete redesign of the Renoise gui renderer (I would imagine)

Posts: 1

Participants: 1

Read full topic